Lancashire · England
Non-Slip Bath Coating in Clayton-le-Woods
Non-slip bath coating in Clayton-le-Woods without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Clayton-le-Woods questions
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Do you work in Clayton-le-Woods?
We do. We send a technician to Clayton-le-Woods for every job, and the price is the same as everywhere else.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Will I see the coating?
Very little: the treated area looks slightly matt.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
What happens next?
We come back with a fixed price. You’re under no obligation.
Non-slip bath coating at your home in Clayton-le-Woods
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We work on acrylic baths, shower trays and enamelled baths, and common reasons people get in touch are worn-out textured areas and resurfaced baths that are now too smooth.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Clayton-le-Woods (PR25, PR6)
- Region
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
Common problems we fix in Clayton-le-Woods
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
The most common problems we are called about are:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
What your quote should include
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
Repair or replace in Clayton-le-Woods?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Clayton-le-Woods customers choose us
- Dust sheets down, tidy finish
- Most jobs done in one visit
- A fixed quote before booking
- We come to you, anywhere in the UK
Read our pricing.
Clayton-le-Woods and nearby
Clayton-le-Woods is about 1 mile east of Leyland, in Lancashire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 482 towns and villages across Lancashire, from the larger towns to small villages. Our jobs stretch from Clayton-le-Woods to Liverpool (about 23 miles away).
Every address in PR25 and PR6 is covered, from the main roads to the quietest streets. Jobs here include addresses on Shady Lane, Kellet Avenue and Kirkby Avenue and the roads around them. If you are just outside Clayton-le-Woods, we cover Buckshaw Village (1 mile south), Whittle-le-Woods (1 mile south-east), Leyland (1 mile west), Lucas Green (2 miles south-east) and Lower Copthurst (2 miles east). Larger places within reach include Preston (5 miles north), Chorley (3 miles south), Lytham St Anne's (15 miles west), Accrington (13 miles east), Fulwood (7 miles north) and Rawtenstall (15 miles east).
What’s near Clayton-le-Woods
We visit homes around Balshaw's Church of England High School, Church of St Ambrose and Clayton-le-Woods Church of England Primary School, among other places. The closest station to Clayton-le-Woods is Leyland station, roughly 1.1 miles west of the centre. Further afield, we also cover the area around British Commercial Vehicle Museum (1.3 miles west) and Penwortham Castle (4.8 miles north-west). Not far away are Healey Nab.
Landlord and trade work in Clayton-le-Woods
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
If you manage property in Clayton-le-Woods, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Point us to the nearest place to park
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What non-slip bath coating costs
You will know the full cost before booking. We take into account:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- One picture of the entire bath or shower tray
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- The material, if you know it
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Also near Clayton-le-Woods
Also in Clayton-le-Woods
About our accreditations · Every repair comes with a one-year guarantee.
