North Yorkshire · England

Non-slip bath & shower coating in Cliffe, North Yorkshire

Non-slip bath coating for Cliffe, without a refit. Get a fixed price from your photos, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Cliffe

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Non-slip bath coating at your home in Cliffe

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We’re often asked to fix resurfaced baths that are now too smooth and safety for older or less mobile people, on acrylic baths, shower trays and enamelled baths.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Location
Cliffe (YO8)
County
North Yorkshire
Cover
12 months on all our work
Price
Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Cliffe questions

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that is in the quote.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Why book with us

  • A fixed quote before booking
  • A year’s guarantee on all work
  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything

Read our prices page.

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • The colour and finish to match
  • How much damage there is
  • Whether old repairs or coatings need taking off
  • Access to the area

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what we need:

  • Details of any past repairs
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • One picture of the whole bath or shower tray

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a free quote

Advice

Common problems we fix in Cliffe

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

Comparing quotes

  • What the guarantee covers, and for how long
  • Who will actually do the work
  • Whether there are any call-out or travel charges
  • Whether they match the colour on site

Our hiring checklist

Honest limits

Not everything can be repaired, and we will tell you before we start. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before you book.

Surfaces we repair

  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)

Cliffe and nearby

Cliffe is about 3 miles east of Selby, in North Yorkshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Cliffe is one of 626 places in North Yorkshire where we work. We work right across the region, from Cliffe to Leeds (23 miles away).

Every address in YO8 is covered. Jobs here include addresses on Station Lane, Oxen Lane and Station View. Nearby, we also work in Cliffe Common (1 mile north), South Duffield (1 mile north-east), Hemingbrough (1 mile south-east), Woodhall (2 miles east) and Barmby on the Marsh (3 miles south-east). We also work in nearby towns such as Selby (3 miles west), Tadcaster (13 miles north-west), Brayton (4 miles west), Thorpe Willoughby (5 miles west), Hambleton (7 miles west) and Cawood (7 miles north-west).

Around Cliffe

Typical jobs here are in homes near Barlby High School, Cliffe Voluntary Controlled Primary School and St. Andrew, among other places. For rail, the closest station is Selby station, about 2.8 miles west of the centre. Other landmarks nearby include Duffield Castle (3.6 miles north-east) and Menthorpe cum Bowthorpe (2.2 miles north-east). Open spaces near Cliffe include Skipwith Common.

Map of Cliffe © OpenStreetMap contributors

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.