Staffordshire · England

Non-slip bath & shower coating in Compton, Staffordshire

Non-slip bath coating in Compton without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Compton

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths

How we handle non-slip bath coating in Compton

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Typical jobs include a bath or tray that is slippery when wet and worn-out textured areas, in wet room floors (ask us), enamelled baths and resurfaced baths.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Compton (DY7)
Region
Staffordshire
Warranty
One year on every repair
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Compton questions

Is repairing better than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders in Compton.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Will I see the coating?

Very little: the treated area looks slightly matt.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Compton and nearby

Compton is about 5 miles south-west of Kingswinford, in Staffordshire. From the centre of Compton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Compton is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 16 miles away.

Postcode districts we cover here: DY7. Other places close to Compton include Coxgreen (1 mile north-west), Enville (1 mile north), Kinver (2 miles south-east), Dunsley (2 miles east) and Four Ashes (2 miles north-west). Larger places within reach include Wombourne (6 miles north-east), Codsall (12 miles north), Brewood (15 miles north), Bilbrook (12 miles north), Bratch (6 miles north-east) and Claverley (6 miles north).

Around Compton

Typical jobs here are in homes near Church of St Mary and Kinver High School and Sixth Form. A little further out are Wordsley Hospital (4.7 miles east) and Stourton Castle (2.4 miles east). Not far away are Stourton Pit and Kinver Edge.

Map of Compton © OpenStreetMap contributors

Do you need non-slip bath coating in Compton?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Get in touch if you’ve noticed any of these:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

Comparing quotes

  • How long it needs to cure
  • Whether cleaning and preparation are in the price
  • Who will actually do the work
  • Whether the price covers travel

10 questions to ask before you book

Repairing versus replacing in Compton

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, so there’s no premium for Compton. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • A year’s guarantee on all work
  • One price list for the entire UK
  • Rooms protected and left tidy
  • No need to remove anything

See our full price list.

Prices and what affects them

We price every job individually. The main factors are:

  • How much damage there is
  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • The material

A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • Details of any past repairs
  • One sharp close-up of the damage
  • Something in shot to show the size
  • Any details about the material

The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Keep a parking space free if you can
  • Move bottles, mats and clutter away from the area
  • Tell us about parking, stairs or access

Ask for a price

Send us photos of the damage and a wider shot of the whole item, and tell us you are in Compton, and we will come back with a fixed quote.

Send pictures for a quote

Advice

Landlord and trade work in Compton

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.