Staffordshire · England

Non-Slip Bath Coating for Wombourne homes

Clear non-slip coatings for baths and shower trays for homes and businesses in Wombourne and across Staffordshire. Free, fixed quotes from your pictures.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Wombourne homes

How the visit works

We begin by going over the job with you. Then the area is sheeted and masked and we start. You can expect it to take a few hours, and we’ll tell you if anything changes.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, typically overnight.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Ensure the area is dry
  • Let us know which floor the room is on

Ask for a price

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.

Send photos for a quote

Read more

How we handle non-slip bath coating in Wombourne

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair shower trays, acrylic baths and resurfaced baths, and the jobs we see most are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.

Whatever the size of the job, it’s backed by a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Wombourne (WV5, DY3, WV4)
County
Staffordshire
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

FAQs for Wombourne

Can you quote from pictures?

Nearly always. If pictures don’t show enough, we will ask for another angle.

It’s been repaired before. Can you still fix it?

Typically, yes. We remove the old repair before doing a new one.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Technicians who travel to you, UK-wide
  • Everything repaired in place
  • We leave the room as we found it
  • CHAS and Constructionline accredited

See our pricing.

Do you need non-slip bath coating in Wombourne?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Send us a picture if you notice any of these:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Questions to ask before booking

  • Whether they match the colour on site
  • Whether a trained technician does the job
  • If travel is included in the price
  • How to look after the finish

Our hiring checklist

When we would advise against a repair

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before booking.

Surfaces we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Shower trays

For landlords and businesses

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What non-slip bath coating costs

Prices are worked out job by job, from your photos. What matters most is:

  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • What the surface is made of

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your photos

You can typically get a fixed price without us visiting. To make it quick:

  • The postcode, so we can plan the visit
  • Any details about the material
  • Natural light rather than flash
  • One picture of the whole bath or shower tray

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Wombourne and nearby

Wombourne is about 3 miles north-west of Kingswinford, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Wombourne is one of 512 places in Staffordshire where we work. We work right across the region, from Wombourne to Birmingham (about 13 miles away).

Postcode districts we cover here: WV5, DY3 and WV4. Whether you live on High Street, Station Road and Lamb Crescent or anywhere nearby, a technician can come to you. Nearby, we also work in Bratch (1 mile north), Himley (1 mile south-east), Orton (2 miles north), Hinksford (2 miles south) and Wall Heath (2 miles south). Further out, we also cover Cannock (14 miles north-east), Burntwood (15 miles north-east), Hednesford (15 miles north-east), Penkridge (14 miles north), Chadsmoor (14 miles north-east) and Norton Canes (13 miles north-east).

What’s near Wombourne

Our clients here include homes close to Church of the Venerable Bede, Blakeley Heath Primary School and Ounsdale High School, among other places. The closest station to Wombourne is Coseley station, about 4.6 miles east of the centre. Further afield, we also cover the area around Broadfield House Glass Museum (2.9 miles south) and Stourton Castle (4.8 miles south). Not far away are Beacon Hill.

Map of Wombourne © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.