Highland · Scotland
Non-Slip Bath Coating in Conon Bridge
Non-slip bath coating for Conon Bridge, without a refit. Send us pictures for a fixed quote, then book a visit.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
Non-slip bath coating at your home in Conon Bridge
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Common call-outs are for a bath or tray that is slippery when wet and safety for older or less mobile people, in shower trays, enamelled baths and acrylic baths.
Every repair comes with our one-year guarantee, wherever you are in Highland. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Conon Bridge (IV7)
- Area hub
- Highland
- Warranty
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Conon Bridge
Conon Bridge is about 10 miles north-west of Inverness, in Highland. From the centre of Conon Bridge to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 253 towns and villages in Highland, from the larger towns to small villages.
Here we cover the IV7 postcode area. Jobs here include addresses on Station Road, High Street and Leanaig Road and the roads around them. Conon Bridge sits on or near the A862 and B9162, which makes travel easy. If you are just outside Conon Bridge, we cover Maryburgh (1 mile north-west), Easter Kinkell (2 miles east), Dingwall (3 miles north), Muir of Ord (3 miles south) and Blairninich (4 miles north-west). We also work in nearby towns such as Inverness (10 miles south-east), Cradlehall (12 miles south-east), Merkinch (9 miles south-east), Hilton (11 miles south-east), Alness (11 miles north-east) and Invergordon (13 miles north-east). For island and remote addresses, call first so we can plan the visit.
Around Conon Bridge
Our clients here include homes close to Conon Hotel and Dingwall Academy and the streets around them. Conon Bridge has its own railway station: Conon Bridge station. Other landmarks nearby include Ross Memorial Hospital (2.1 miles north) and Brahan Castle (2.2 miles west). For a walk, there is Loch Ussie and Tollie Red Kites RSPB Reserve.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Honest limits
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
Questions from Conon Bridge
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Conon Bridge.
What happens next?
We come back with a fixed price, typically with dates to choose from. There’s no obligation to book.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Will I see the coating?
Very little: it shows as a matt area where you stand.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Common problems we fix in Conon Bridge
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Signs it’s time to call us include:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
What to look for in a quote
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
- If travel is included in the price
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Dust sheets down, tidy finish
- No extra charge for your area
- One-year guarantee on every repair
- One visit for most repairs
Read our full price list.
Nearby places to Conon Bridge
What else we do in Conon Bridge
What non-slip bath coating costs
We give every job a fixed price from pictures. This is what makes a difference:
- How easy the damage is to reach
- What kind of damage it is
- How many items we do on one visit
- Unusual colours or finishes
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Natural light rather than flash
- Any details about the material
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away whether it can be repaired.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and how to look after it.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Landlord and trade work in Conon Bridge
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
