Neath Port Talbot · Wales
Non-slip bath & shower coating in Corlannau, Neath Port Talbot
Clear non-slip coatings for baths and shower trays at your home in Corlannau, with a one-year guarantee on every repair.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Repairing versus replacing in Corlannau
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
Why us?
- Nothing taken out or refitted
- Fixed prices from your pictures
- Technicians who travel to you, UK-wide
- Generally one visit, start to finish
Read our full price list.
Non-slip bath coating in Corlannau, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, on resurfaced baths, acrylic baths and wet room floors (ask us).
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Corlannau (SA13, SA12)
- Area hub
- Neath Port Talbot
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
If you manage property in Corlannau, we will quote for several properties at once. Just send photos for each address and we will price them together.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Your questions about non-slip bath coating in Corlannau
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will I see the coating?
Very little: the treated area looks slightly matt.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Common problems we fix in Corlannau
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Comparing quotes
- Whether there are any call-out or travel charges
- Aftercare advice
- What prep work is covered
- How your room will be protected
What non-slip bath coating costs
Quotes are free and the price is fixed. What we look at:
- Access to the area
- Any earlier repairs that need removing first
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Your postcode, so we can check dates
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Getting ready for the visit
- Point us to the nearest place to park
- Open a window if you can
- Mention any earlier repairs or resurfacing
Ask for a price
Upload photos of the damage and a wider shot of the whole item, with your SA13 postcode, and we will reply with a fixed price.
Advice
When a repair is not the answer
A repair isn’t right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
Also near Corlannau
Other services in Corlannau
Our work in Corlannau
Corlannau is about 1 mile north-east of Port Talbot, in Neath Port Talbot. From the centre of Corlannau to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 100 towns and villages in Neath Port Talbot, from the larger towns to small villages.
Our technicians cover all of the SA13 and SA12 postcode area. You’ll find streets such as Ford Road, Forge Road and High Street. With the M4 and A4107 close by, Corlannau is easy for our technicians to reach. Close by, we cover Caerhendy (1 mile north-east), Brynbryddan (1 mile north), Cwmavon (1 mile north-east), Cwmbychan (1 mile north) and Pwll-y-glaw (2 miles north-east). Within a short drive, we also cover Neath (4 miles north), Mount Pleasant (4 miles north), Pontardawe (9 miles north), Glyn-neath (12 miles north-east), Pentreffynnon (5 miles north-west) and Pencaerau (4 miles north-west).
Near you in Corlannau
Typical jobs here are in homes near Glan Afan Comprehensive School, St Agnes Church and Maggie Mays pub and the streets around them. For rail, the closest station is Port Talbot Parkway station, roughly 0.8 miles south. Well-known places in the area include Aberafan Castle (0.7 miles south-west) and Aberafan Centre (0.6 miles south-west). The countryside around Corlannau includes Mynydd Dinas and Gnoll Estate Country Park lake 1.
About our accreditations · Every repair comes with a one-year guarantee.
