Wiltshire · England

Non-slip bath & shower coating in Corton, Wiltshire

Fixed-price non-slip bath coating in Corton and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Corton

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Fixed prices from your pictures
  • CHAS and Constructionline accredited
  • Typically one visit, start to finish
  • One-year guarantee on every repair

See our pricing.

Non-slip bath coating in Corton, done in place

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. If you’re dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help, whatever the material.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Location
Corton (BA12)
Area hub
Wiltshire
Warranty
One year on every repair
Quotes
Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What we are called out for in Corton

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas

Before booking anyone

  • What protection goes down before work starts
  • The length of the guarantee and what it covers
  • Whether they match the colour on site
  • When it can be used again

Choosing a repair company

FAQs for Corton

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

How much does non-slip bath coating cost in Corton?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

What happens if you find more damage?

Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.

Do you cover the entire of Wiltshire?

Across the UK. Our prices are the same everywhere.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

What affects the price in Corton

Every quote is fixed and free. What we look at:

  • The material
  • How many items we do on one visit
  • What kind of damage it is
  • How many areas need work

The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

How to get a fixed price

It only takes a minute to photograph the damage. Please include:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare

If you are in Corton and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a morning or an afternoon. Before we go, we’ll explain when it can be used and how to care for it.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Tell us about parking, stairs or access
  • Open a window if you can

Get a quote

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Send photos for a quote

Related advice

Honest limits

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we work on in Corton

  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)

About Corton

Corton is about 5 miles south-east of Warminster, in Wiltshire. We travel to customers in Corton, so there is no workshop to go to. We cover all 425 towns and villages in Wiltshire, from the larger towns to small villages.

Our repair technicians cover all of the BA12 postcode area and the streets around it. Other places close to Corton include Upton Lovell (1 mile east), Sherrington (2 miles south-east), Codford St Peter (2 miles east), Codford St Mary (2 miles east) and Bapton (4 miles south-east). We also work in nearby towns such as Salisbury (14 miles south-east), Trowbridge (12 miles north-west), Devizes (14 miles north), Westbury (8 miles north-west), Melksham (14 miles north) and Warminster (5 miles north-west).

Near you in Corton

Our clients here include homes close to St Augustine's church and the streets around them. The nearest railway station is Warminster station, about 4.6 miles north-west of the centre. A little further out are Motte and double ringwork east of Bishopstrow Farm (3 miles north-west).

Map of Corton © OpenStreetMap contributors

Landlords, agents and businesses in Corton

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.