Aberdeen · Scotland

Non-Slip Bath Coating in Craigiebuckler

We travel to Craigiebuckler for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Craigiebuckler?

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • Any earlier repairs that need removing first
  • What kind of damage it is
  • How easy the damage is to reach
  • Unusual colours or finishes

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from photos

When you take your photos, a few simple things make all the difference:

  • Your postcode, so we can check dates
  • One picture of the entire bath or shower tray
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

About our non-slip bath coating in Craigiebuckler

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. If you’re dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can typically put it right, whatever the material.

Every job is backed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Where
Craigiebuckler (AB15)
County
Aberdeen
Warranty
A year, on every repair
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Craigiebuckler: your questions answered

Will I see the coating?

Only slightly: the treated area looks slightly matt.

What happens next?

You will get a fixed quote back. There is no obligation to book.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

How quickly can you book me in?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Do you cover Craigiebuckler?

Yes. We cover the whole UK and travel to Craigiebuckler. Send photos and we will quote, or call 0345 017 0787.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why Craigiebuckler customers choose us

  • Typically one visit, start to finish
  • Dust sheets down, tidy finish
  • Technicians who travel to you, UK-wide
  • No need to remove anything

See our prices page.

When to call us in Craigiebuckler

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Most people contact us after spotting one of these:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Questions to ask before booking

  • How long it needs to cure
  • Whether the price is fixed and includes VAT
  • What happens if the damage is worse than the pictures show
  • What prep work is covered

10 questions to ask before you book

What we can’t put right

We would rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Shower trays
  • Enamelled baths

Work for landlords and builders

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Clear the area around the damage
  • Mention any parking restrictions or tricky access

How to get a price

If you are in Craigiebuckler and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a fixed price

Read more

Where we work around Craigiebuckler

Craigiebuckler is about 2 miles south-west of Aberdeen, in Aberdeen. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 63 towns and villages in Aberdeen.

All of AB15 is covered, from the main roads to the quietest streets. You will find streets such as Oyne Road, Queen's Road and Fintray Road, and we cover them all. You’ll find Craigiebuckler on the A9119, which makes it straightforward to reach. Nearby, we also work in Braeside (1 mile south-east), West End (1 mile east), Summerhill (1 mile north), Rubislaw (1 mile north-east) and Midstocket (1 mile north-east). Within a short drive, we also cover New Aberdeen (3 miles east), Dyce (5 miles north), Tillydrone (3 miles north-east), Portlethen (5 miles south), Donside Village (3 miles north-east) and Cove Bay (3 miles south-east).

Landmarks near Craigiebuckler

Locally, our jobs take us to homes close to Airyhall Primary School, Aberdeen and Hazlehead Park and the streets around them. Craigiebuckler’s nearest station is Aberdeen station, roughly 2.4 miles east. Well-known places in the area include Woodend Hospital (0.9 miles north-west) and Gordon Highlanders Museum (0.5 miles east). Green spaces nearby include Rubislaw Quarry and Kincorth Hill.

Map of Craigiebuckler © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.