Neath Port Talbot · Wales
Non-Slip Bath Coating for Croeserw homes
Fixed-price non-slip bath coating in Croeserw and the surrounding area, done in a single visit in most cases.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
What affects the price in Croeserw
We give every job a fixed price from photos. These are the things that affect it:
- The material
- How many areas need work
- Whether we combine several jobs
- The colour and finish to match
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
You can take the pictures on your phone. Just ensure we can see:
- Natural light rather than flash
- Any earlier repairs or coatings
- The material, if you know it
- Your postcode, so we can check dates
The quickest way to a price is to send two or three photos using our quote form or call us. We will say immediately whether it can be repaired.
About our non-slip bath coating in Croeserw
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We are frequently asked to fix safety for older or less mobile people and a bath or tray that is slippery when wet, across resurfaced baths, shower trays and enamelled baths.
Every repair is covered by our one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Croeserw (SA13)
- Area hub
- Neath Port Talbot
- Cover
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Croeserw
Croeserw is about 3 miles north of Maesteg, in Neath Port Talbot. Jobs in Croeserw are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Croeserw is one of 100 towns and villages in Neath Port Talbot where we work.
Our technicians cover all of SA13. We regularly work on streets such as Hillcroft Crescent, South Avenue and Gwynedd Avenue and the roads around them. We also travel to Blaencaerau (1 mile south-west), Cymmer (1 mile north-west), Brynheulog (1 mile south-west), Caerau (1 mile south-west) and Dyffryn (1 mile south-west). We also work in nearby towns such as Neath (7 miles west), Port Talbot (7 miles south-west), Sandfields (8 miles south-west), Mount Pleasant (7 miles west), Baglan Moors (8 miles west) and Sandfields West (9 miles west).
Around Croeserw
We visit homes around Croeserw Hotel, St Cynfelyn's Church and Maesteg School, among other places. The nearest railway station is Maesteg station, about 2.5 miles south of the centre. Well-known places in the area include Llwdarth (3.3 miles south) and Maesteg Community Hospital (2.7 miles south-west). Green spaces nearby include Foel Fawr.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
Before we arrive
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
Signs you need non-slip bath coating in Croeserw
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before booking
- How your room will be protected
- Aftercare advice
- How soon you can use it again
- Who will actually do the work
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Shower trays
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Acrylic baths
FAQs for Croeserw
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Do you come to Croeserw?
Yes. We cover the whole UK and come to Croeserw. Send pictures and we will quote, or call 0345 017 0787.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Also near Croeserw
What else we do in Croeserw
Landlords, agents and businesses in Croeserw
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- No need to remove anything
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- Most jobs done in one visit
Read our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
