Buckinghamshire · England

Non-Slip Bath Coating in Cryers Hill

Non-slip bath coating in Cryers Hill without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Cryers Hill

Non-slip bath coating at your home in Cryers Hill

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Our technicians work on wet room floors (ask us), acrylic baths and shower trays, and the jobs we see most are safety for older or less mobile people and worn-out textured areas.

We stand behind the work with a one-year guarantee, so you are covered after the visit. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Cryers Hill (HP15)
Region
Buckinghamshire
Guarantee
A year, on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

Surfaces we repair

  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths

Work for landlords and builders

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

Common questions in Cryers Hill

Will I see the coating?

Very little: the treated area looks slightly matt.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

How much does non-slip bath coating cost in Cryers Hill?

Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Is there any odour?

There may be a mild smell during the work that clears as it cures.

Do you come to Cryers Hill?

We do. We send a technician to Cryers Hill for every job, with no extra charge for travel.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

What happens next?

We come back with a fixed quote, plus dates. There’s no obligation to book.

How we price non-slip bath coating

We give every job a fixed price from pictures. These are the things that affect it:

  • How many areas need work
  • Unusual colours or finishes
  • Whether we combine several jobs
  • Access to the area

Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Send pictures for a quote

You can generally get a fixed quote without us visiting. To make it quick:

  • Something in shot to show the size
  • A photo taken from further back
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

How the visit works

Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a few hours. The room is left tidy and ready to use once it has cured.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Preparing for the visit

  • Let us know which floor the room is on
  • Have a window or extractor fan available
  • Let the surface dry out before the visit

Get a quote

Most customers in Cryers Hill get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Advice

Do you need non-slip bath coating in Cryers Hill?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Contact us if you’ve noticed:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Questions to ask before booking

  • How to care for the finish
  • What the guarantee covers, and for how long
  • How your room will be protected
  • Whether the price is fixed and includes VAT

10 questions to ask before you book

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

Why us?

  • No extra charge for your area
  • One-year guarantee on every repair
  • Everything repaired in place
  • We will tell you if it’s not worth repairing

Take a look at our prices page.

Our work in Cryers Hill

Cryers Hill is about 2 miles north of High Wycombe, in Buckinghamshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Cryers Hill is one of 263 towns and villages in Buckinghamshire where we work. Our jobs stretch from Cryers Hill to London (30 miles away).

Postcode districts we cover here: HP15. Local streets include Four Ashes Road, Cryers Hill Road and Cryers Hill Lane. We also cover the places around Cryers Hill: Four Ashes (1 mile south), Widmer End (1 mile east), Great Kingshill (1 mile north), Hughenden Valley (1 mile west) and Spurlands End (1 mile east). Larger places within reach include Aylesbury (11 miles north), Chesham (6 miles north-east), Marlow (6 miles south), Amersham (6 miles east), Beaconsfield (5 miles south-east) and Chalfont St Peter (9 miles south-east).

What’s near Cryers Hill

We visit homes around Great Kingshill Church of England Combined School, Sir William Ramsay School and The White Lion pub. Other local landmarks include Pipers Corner School (0.6 miles north-west) and Church of the Good Shepherd (0.8 miles east). Cryers Hill’s nearest station is High Wycombe station, about 2.4 miles south of the centre. Nearby you will also find Eden (2.5 miles south) and Hospital of St John the Baptist (2.5 miles south). Green spaces nearby include Prestwood Local Nature Reserve.

Map of Cryers Hill © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.