North Tyneside · England
Non-Slip Bath Coating for Cullercoats homes
Non-slip bath coating across Cullercoats and nearby, normally in one visit.
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Non-slip bath coating in Cullercoats without replacing anything
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re often asked to fix bath mats that harbour mould or get forgotten and safety for older or less mobile people, in resurfaced baths, wet room floors (ask us) and shower trays.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Cullercoats (NE30, NE26, NE25)
- Region
- North Tyneside
- Warranty
- 12 months on all our work
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Cullercoats
- Everything repaired in place
- Most jobs done in one visit
- We leave the room as we found it
- Honest advice, even when it means no job
Read our pricing.
What we’re called out for in Cullercoats
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Send us a picture if you notice any of these:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
What to look for in a quote
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- How your room will be protected
- How to look after the finish
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Cullercoats
We charge the same across the UK, including Cullercoats. What changes the price is:
- The type of damage
- What the surface is made of
- The size and number of damaged areas
- How easy the damage is to reach
Our prices are the same across the UK, with no extra for Cullercoats. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
You can normally get a fixed price without us visiting. To help us price it:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- One picture of the entire bath or shower tray
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.
How it works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- We leave it to cure, generally overnight.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Let us know about parking or access
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
- Resurfaced baths
- Acrylic baths
Your questions about non-slip bath coating in Cullercoats
What does non-slip bath coating cost?
We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your NE30 postcode.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens after I send pictures?
You will get a fixed quote back, normally with dates to choose from. You are under no obligation.
Nearby places to Cullercoats
What else we do in Cullercoats
About Cullercoats
Cullercoats is about 1 mile north-east of Tynemouth, in North Tyneside. Our repair technicians come to homes and businesses in Cullercoats and nearby villages, so there is no workshop to go to. Our technicians cover 30 places in North Tyneside, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 9 miles away.
All of NE30, NE26 and NE25 is within our area. That includes homes on Shap Road, Dene Road and Mast Lane. Being close to the A191, Cullercoats is easy for our technicians to reach. We also travel to Whitley Bay (1 mile north-west), Tynemouth (1 mile south-west), North Shields (2 miles south), Preston (2 miles south) and Murton (2 miles west). Larger places within reach include Wallsend (4 miles south-west), Longbenton (5 miles west), Killingworth (5 miles west), Seaton Delaval (4 miles north-west), Howdon (3 miles south-west) and Shiremoor (3 miles west). Cullercoats is among the bigger towns we cover in North Tyneside.
Landmarks near Cullercoats
Typical jobs here are in homes near St George's Cullercoats, Marden High School and Queens Head pub. The nearest railway station is Northumberland Park (Tyne and Wear) station, roughly 3.4 miles west of the centre. Other landmarks nearby include Silverlink Shopping Park (2.8 miles south-west) and Municipal Borough of Whitley Bay (1.3 miles north-west).
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
