North Tyneside · England
Non-slip bath & shower coating in Murton, North Tyneside
Clear non-slip coatings for baths and shower trays for homes and businesses in Murton and across North Tyneside. Send pictures for a free, fixed quote.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Non-slip bath coating at your home in Murton
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Whether it’s bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, whatever the material.
You get a one-year guarantee, the same in Murton as everywhere else we work. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Murton (NE29, NE27, NE25)
- Region
- North Tyneside
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Murton
There is no charge for travel to Murton. The price comes down to:
- The size and number of damaged areas
- How hard the colour is to match
- Previous DIY repairs that have to come out
- The type of damage
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- The material, if you know it
- Something in shot to show the size
- A wider photo showing the whole bath or shower tray
- Any earlier repairs or coatings
If you’re in Murton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
What you get with us
- Same prices wherever you are
- We leave the room as we found it
- No need to remove anything
- Honest advice, even when it means no job
Read our pricing.
Murton and nearby
Murton is about 1 mile south-west of Whitley Bay, in North Tyneside. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Murton is one of 30 towns and villages in North Tyneside where we work. Our nearest city page is Newcastle upon Tyne, about 7 miles away.
We cover every part of the NE29, NE27 and NE25 postcode area and the streets around it. Whether you live on Murton Lane, New York Road and Sherwood or anywhere nearby, a technician can come to you. Close by, we cover New York (1 mile south), Earsdon (1 mile north-west), Whitley Bay (1 mile north-east), Chirton (2 miles south) and Tynemouth (2 miles south-east). Further out, we also cover Wallsend (3 miles south-west), Longbenton (3 miles west), Killingworth (3 miles west), Seaton Delaval (3 miles north-west), Benton (4 miles west) and Seaton Sluice (4 miles north).
What’s near Murton
Around Murton, we work in homes near Monkseaton High School, Langley First School and Wellfield Middle School and the streets around them. The nearest railway station is Northumberland Park (Tyne and Wear) station, about 1.3 miles west of the centre. Further afield, we also cover the area around Tynemouth Castle and Priory (2.9 miles east) and Stephenson Railway Museum (1.1 miles south).
- Local facilities include Municipal Borough of Whitley Bay (2 miles north-east)
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
FAQs for Murton
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do you come to Murton?
Yes, we do. Repair technicians travel to Murton from across the region, with no extra charge for travel.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
How much does non-slip bath coating cost in Murton?
Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Which areas do you work in?
Everywhere in the UK, Murton included. There is no extra charge for travel.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a few hours, including clearing up.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
What else we do in Murton
Do you need non-slip bath coating in Murton?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Comparing quotes
- Who will actually do the work
- How your room will be protected
- If travel is included in the price
- Whether the price is fixed and includes VAT
Landlord and trade work in Murton
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
