Cumbria · England
Non-Slip Bath Coating in Dalton-in-Furness
Clear non-slip coatings for baths and shower trays for homes and businesses in Dalton-in-Furness and across Cumbria. Send photos for a free, fixed quote.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Non-slip bath coating at your home in Dalton-in-Furness
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Whether it’s resurfaced baths that are now too smooth and safety for older or less mobile people, we can usually put it right, on enamelled baths, shower trays and acrylic baths alike.
All our work comes with our one-year guarantee, wherever you are in Cumbria. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Dalton-in-Furness (LA15, LA13)
- Area hub
- Cumbria
- Cover
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a morning or an afternoon.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Getting ready for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Ask for a price
Upload a picture of the damage and a wider shot of the entire item, with your LA15 postcode, and we’ll reply with a fixed price.
Related advice
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What affects the price in Dalton-in-Furness
There’s no charge for travel to Dalton-in-Furness. The price depends on:
- Access to the area
- What kind of damage it is
- The colour and finish to match
- Whether old repairs or coatings need taking off
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Landlord and trade work in Dalton-in-Furness
We carry out planned and one-off repairs for housing associations and facilities teams in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
When a repair is not the answer
A repair is not right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Shower trays
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
Towns and villages near Dalton-in-Furness
What else we do in Dalton-in-Furness
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Dalton-in-Furness
- One price list for the whole UK
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Most jobs done in one visit
Take a look at our full price list.
Questions from Dalton-in-Furness
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you cover Dalton-in-Furness?
Yes. We work across the UK and travel to Dalton-in-Furness. Send us pictures for a fixed quote, or call 0345 017 0787.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
What happens next?
We come back with a fixed quote, usually with dates to choose from. There’s no obligation to book.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Covering Dalton-in-Furness
Dalton-in-Furness is about 3 miles north-east of Barrow-in-Furness, in Cumbria. We visit homes and businesses in Dalton-in-Furness, so nothing has to leave your home. We work in 438 places in Cumbria. We work right across the region, from Dalton-in-Furness to Liverpool (about 53 miles away).
We cover every part of LA15 and LA13. Whether you live on Market Street, Station Road and Market Place or a nearby road, a technician can come to you. We also cover the places around Dalton-in-Furness: Newton (1 mile south), Stainton with Adgarley (1 mile south-east), Lindal in Furness (2 miles north-east), Marton (2 miles north) and Little Urswick (2 miles east). Within a short drive, we also cover Barrow-in-Furness (3 miles south-west), Ulverston (4 miles north-east), Hindpool (3 miles south-west), Salthouse (3 miles south-west), Risedale (3 miles south) and Vickerstown (5 miles south-west).
What’s near Dalton-in-Furness
Locally, our jobs take us to homes close to Seventh Day Adventist Church With Attached Railings, Chappells Tavern and Chapel Street Infants and Nursery School. Dalton-in-Furness has its own railway station: Dalton station. Nearby you’ll also find Furness Abbey Museum (1.5 miles south-west) and Dalton Castle (less than half a mile west). Green spaces nearby include Birkrigg Common and North Walney.
Do you need non-slip bath coating in Dalton-in-Furness?
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed any of these:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Before you book anyone
- If travel is included in the price
- Aftercare advice
- What happens if they find more damage
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
