Flintshire · England

Non-Slip Bath Coating in Drury

Fixed-price non-slip bath coating in Drury and the surrounding area, normally in one visit and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Drury

How we handle non-slip bath coating in Drury

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include safety for older or less mobile people and bath mats that harbour mould or get forgotten, across shower trays, wet room floors (ask us) and resurfaced baths.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Drury (CH7)
Area hub
Flintshire
Warranty
12 months on all our work
Price
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Work for landlords and builders

Landlords, letting agents and housing providers in Drury use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

What non-slip bath coating costs

There’s no area surcharge for Drury. The price reflects:

  • The type of damage
  • The size and number of damaged areas
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off

Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Quotes from your pictures

Two or three clear photos are typically enough. Try to include:

  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Where we work around Drury

Drury is about 1 mile east of Bwcle, in Flintshire. Jobs in Drury are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Drury is one of 139 places in Flintshire where we work. You can also see our page for Liverpool, about 17 miles away.

Our repair technicians cover all of CH7. From Drury Lane, Hawarden Drive and Meadow Avenue or a nearby road, a technician can come to you. Neighbouring places we cover include Burntwood Pentre (1 mile north-west), Lane End (1 mile south-west), Little Mountain (1 mile south), Spon Green (1 mile south-west) and Dobs Hill (1 mile south-east). We also work in nearby towns such as Connah's Quay (3 miles north), Flint (6 miles north-west), Saltney (6 miles east), Mold (4 miles west), Holywell (10 miles north-west) and Lache (6 miles east).

Local landmarks in Drury

Around Drury, we work in homes near The Good Shepherd, The Parrot Inn and Drury C.P. School and the streets around them. Nearby too are Gladstone's Library (1.5 miles north-east), Etna Park (0.7 miles north-west) and Elfed High School (1.2 miles west). The nearest railway station is Buckley station, roughly 0.7 miles south of the centre. Nearby you will also find Buckley Library (1.1 miles west) and West Saltney (2.9 miles north-east). For a walk, there’s Prenbrigog and Padeswood Pool.

Map of Drury © OpenStreetMap contributors

Drury questions

What happens next?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

Do you work in Drury?

Yes. We work across the UK and travel to Drury. Send pictures and we will quote, or call 0345 017 0787.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Can I get a quote without a visit?

Normally, yes. Clear photos let us give you a fixed price without visiting.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

How do I book?

Photos of the damage, a photo of the whole bath or shower tray and your postcode. After that, we just agree a date.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How the visit works

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Make sure the area is dry
  • Point us to the nearest place to park
  • Mention any parking restrictions or tricky access

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Advice

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

What we’re called out for in Drury

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things clients normally mention when they call include:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • How soon you can use it again
  • The length of the guarantee and what it covers
  • How to care for the finish
  • Whether a trained technician does the job

How to compare quotes

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Drury

  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • Honest advice, even when it means no job
  • One-year guarantee on every repair

See our prices page.

What we can’t put right

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

What we work on

  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.