Flintshire · England

Non-slip bath & shower coating in Hawarden, Flintshire

Clear non-slip coatings for baths and shower trays for homes and businesses in Hawarden and across Flintshire. Send pictures for a free, fixed quote.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Hawarden homes

About our non-slip bath coating in Hawarden

The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. We’re often asked to fix bath mats that harbour mould or get forgotten and safety for older or less mobile people, in shower trays, enamelled baths and resurfaced baths.

You get a one-year guarantee, the same in Hawarden as everywhere else we work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Area
Hawarden (CH5)
County
Flintshire
Warranty
One year on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Common problems we fix in Hawarden

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Keep an eye out for any of the following:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

What your quote should include

  • Whether the price is fixed and includes VAT
  • What the guarantee covers, and for how long
  • How long it needs to cure
  • What prep work is covered

10 questions to ask before you book

Honest limits

We’ll always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths

What happens on the day

Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a few hours. The room is left tidy and ready to use once it has cured.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Mention any earlier repairs or resurfacing

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a free quote

Read more

What non-slip bath coating costs

We price every job individually, from your photos. What matters most is:

  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • Any earlier repairs that need removing first
  • Access to the area

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.

How to get a fixed price

We price nearly every job from photos. This is what to send:

  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • What it’s made of, if you know
  • A photo taken from further back

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Common questions in Hawarden

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Do you cover the whole of Flintshire?

We work UK-wide. Prices don’t change with location.

Do you cover Hawarden?

We do. Technicians travel to Hawarden from across the region, and the price is the same as everywhere else.

Repairing versus replacing in Hawarden

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not where you live. The full price is agreed before you book.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Free fixed quotes from pictures
  • Honest advice, even when it means no job

Read our pricing.

Our work in Hawarden

Hawarden (also: Penarlâg) is about 2 miles south of Connah's Quay, in Flintshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 139 towns and villages across Flintshire, from the larger towns to small villages. Our jobs stretch from Hawarden to Liverpool (16 miles away).

Every address in CH5 is within our area. From Station Road, Green Meadows and Walpole Avenue or anywhere nearby, we can come to you. We also cover the places around Hawarden: Ewloe (1 mile north), Burntwood Pentre (1 mile south-west), Ewloe Green (1 mile north-west), Drury (1 mile south) and Aston (1 mile north). Larger places within reach include Flint (5 miles north-west), Saltney (5 miles east), Mold (4 miles west), Holywell (9 miles north-west), Lache (5 miles east) and Westminster Park (6 miles east).

Landmarks near Hawarden

Around Hawarden, we work in homes near Crown & Liver pub, Gladstone's Library and English Methodist Church and the streets around them. You’ll also find Hawarden High School (less than half a mile north-east), Ewloe Green C.P. School (0.6 miles north-west) and Etna Park (1 mile south-west). Hawarden’s nearest station is Hawarden station, roughly 0.7 miles east. Further afield, we also cover the area around Deeside Community Hospital (1.2 miles north) and Buckley Library (1.8 miles south-west). For a walk, there’s Prenbrigog and Deeside Nature Reserve.

  • Parks and local facilities nearby include West Saltney (2.4 miles east)
Map of Hawarden © OpenStreetMap contributors

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.