Gloucestershire · England

Non-slip bath & shower coating in Edge, Gloucestershire

Non-slip bath coating in and around Edge: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Edge

When a repair is not the answer

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths

Non-slip bath coating in Edge without replacing anything

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. If you are dealing with safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can generally put it right.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Edge (GL6)
County
Gloucestershire
Warranty
12 months on all our work
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park

Getting a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Send photos for a quote

Read more

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price depends on:

  • Unusual colours or finishes
  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • The material and finish

A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • One picture of the entire bath or shower tray
  • Something in shot to show the size

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Common problems we fix in Edge

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Look out for these signs:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • The length of the guarantee and what it covers
  • How the room is protected while they work
  • Is the price fixed, and does it include VAT?
  • How the colour is matched

10 questions to ask before you book

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • No extra charge for your area
  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited
  • Free fixed quotes from pictures

See our full price list.

Common questions in Edge

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Can you repair something that is been repaired before?

Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

How do I get a price for non-slip bath coating in Edge?

Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Work for landlords and builders

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

Edge and the surrounding area

Edge is about 3 miles north of Stroud, in Gloucestershire. We travel to homes and businesses in Edge and the surrounding area, so nothing has to leave your home. Edge is one of 470 places in Gloucestershire we cover. We work right across the region, from Edge to Birmingham (49 miles away).

We work across the GL6 postcode area. Streets in the area include Back Edge Lane, Paul Mead and Edge Lane, all of which we cover. Close by, we cover Pitchcombe (1 mile south), Whiteshill (2 miles south), Ruscombe (2 miles south-west), Bread Street (2 miles south-west) and Randwick (2 miles south-west). Within a short drive, we also cover Cheltenham (10 miles north-east), Gloucester (4 miles north), Stroud (3 miles south), Tewkesbury (14 miles north), St Paul's (10 miles north-east) and Cirencester (12 miles south-east).

What’s near Edge

Around Edge, we work in homes near Church of St John the Baptist, The Eagle pub and The Croft Primary School, among other places. The nearest railway station is Stroud station, about 3 miles south of the centre. Nearby you will also find Harescombe Castle (0.9 miles west) and Stratford Park (2.6 miles south). Green spaces nearby include Frome Banks and Haresfield Beacon.

Map of Edge © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.