Argyll and Bute · Scotland

Non-Slip Bath Coating for Ellenabeich homes

Local non-slip bath coating for Ellenabeich: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Ellenabeich

How we handle non-slip bath coating in Ellenabeich

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Our repair technicians work on wet room floors (ask us), resurfaced baths and acrylic baths, and people most often call us about bath mats that harbour mould or get forgotten and safety for older or less mobile people.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Ellenabeich (PA34)
Area hub
Argyll and Bute
Warranty
One year on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What non-slip bath coating costs

A fixed quote means you know the cost before you book. We look at:

  • The type of damage
  • Whether we combine several jobs
  • How many areas need work
  • The colour and finish to match

Our prices are the same across the UK, so there’s no premium for Ellenabeich. The job itself decides the price: how much damage, what it’s made of and how many items.

Quotes from your photos

You can typically get a fixed quote without us visiting. To make it quick:

  • Any earlier repairs or coatings
  • Something in shot to show the size
  • A clear, close picture of the problem area
  • What it’s made of, if you know

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Ellenabeich questions

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Argyll and Bute.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we will plan for it.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

When a repair isn’t the answer

A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

How it works

You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Let us know about parking or access
  • Ensure the room can be ventilated
  • Let us know if it has been repaired before

Ask for a price

Send us photos of the damage and a wider shot of the entire item, with your PA34 postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Related advice

Ellenabeich and nearby

Ellenabeich is about 40 miles north-west of Helensburgh, in Argyll and Bute. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Ellenabeich is one of 118 places in Argyll and Bute we cover. Our nearest city page is Glasgow, about 60 miles away.

We cover every part of the PA34 postcode area and the streets around it. We also cover the places around Ellenabeich: Clachan Seil (2 miles north-east), Craobh Haven (6 miles south-east), Kilmelford (6 miles east), Barravullin (7 miles south-east) and Ardfern (9 miles south-east). We also work in nearby towns such as Oban (10 miles north-east), Dunollie (11 miles north-east) and Dunbeg (13 miles north-east). For island and remote addresses, call first so we can plan the visit.

Local landmarks in Ellenabeich

We visit homes around Tin Church, among other places. Further afield, we also cover the area around Slate Islands Heritage Trust Museum (0.7 miles north-west) and Ardfad Castle (2 miles north-east). Green spaces nearby include Ballachuan Loch.

Map of Ellenabeich © OpenStreetMap contributors

Do you need non-slip bath coating in Ellenabeich?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a photo:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

What your quote should include

  • Whether they match the colour on site
  • Who will actually do the work
  • What happens if the damage is worse than the pictures show
  • Whether the price covers travel

How to compare quotes

For landlords and businesses

If you manage property in Ellenabeich, we will quote for several properties at once. Send pictures for each one and we’ll price them together.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Repairing versus replacing in Ellenabeich

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Why book with us

  • One price list for the entire UK
  • Rooms protected and left tidy
  • Fixed prices from your photos
  • Work done at your home or business

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.