Oxfordshire · England
Non-Slip Bath Coating in Emmington
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Emmington. Free, fixed quotes from your pictures.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
About our non-slip bath coating in Emmington
The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. Our repair technicians work on enamelled baths, resurfaced baths and shower trays, and common reasons people get in touch are resurfaced baths that are now too smooth and safety for older or less mobile people.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Emmington (OX39)
- Region
- Oxfordshire
- Warranty
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Emmington customers choose us
- Honest advice, even when it means no job
- Fixed prices from your pictures
- Every repair guaranteed for a year
- One visit for most repairs
Take a look at our prices page.
What else we do in Emmington
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
Emmington questions
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Prices and what affects them
Prices are worked out job by job, from your pictures. What matters most is:
- Access to the area
- How many areas need work
- What kind of damage it is
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. You will see the full price before booking.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Details of any past repairs
- Natural light rather than flash
- Where you are, by postcode
- A wider photo showing the entire bath or shower tray
For a price in Emmington, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
For landlords and businesses
For anyone letting property in or around Emmington, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Where we work around Emmington
Emmington is about 3 miles south-east of Thame, in Oxfordshire. Whether you are in the middle of Emmington or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 443 towns and villages in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Emmington to London (39 miles away).
We cover every part of OX39 and the streets around it. Nearby, we also work in Sydenham (1 mile south-west), Kingston Stert (1 mile south-west), Chinnor (1 mile south-east), Towersey (2 miles north) and Thame (3 miles north-west). We also work in nearby towns such as Oxford (13 miles west), Didcot (15 miles south-west), Abingdon-on-Thames (15 miles west), Henley-on-Thames (13 miles south), Benson (10 miles south-west) and Headington Quarry (12 miles west).
What’s near Emmington
In Emmington, that means homes near The Inn at Emmington, Mill Lane Community Primary School and Church of St Nicholas. The closest station to Emmington is Princes Risborough station, about 3.8 miles east. Other landmarks nearby include Thame Museum (3.1 miles north-west) and Thame Community Hospital (2.6 miles north-west). For a walk, there’s Bald Hill and Oakley Hill nature reserve.
Do you need non-slip bath coating in Emmington?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Send us a picture if you notice any of these:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
What to look for in a quote
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- How long it needs to cure
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
