Oxfordshire · England
Non-Slip Bath Coating in Towersey
Our technicians come to Towersey for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Your questions about non-slip bath coating in Towersey
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
How do I get a price for non-slip bath coating in Towersey?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How we handle non-slip bath coating in Towersey
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We are often asked to fix a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, in resurfaced baths, enamelled baths and wet room floors (ask us).
We stand behind the work with a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Towersey (OX9)
- County
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why book with us
- A fixed quote before booking
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
Take a look at our pricing.
Towersey and nearby
Towersey is about 1 mile east of Thame, in Oxfordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Towersey is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 40 miles away.
Jobs in OX9 work the same way as everywhere else we cover. From Lower Green, Thame Road and Windmill Close or a nearby road, we can come to you. Other places close to Towersey include Kingsey (1 mile north-east), Thame (1 mile west), Emmington (2 miles south), Haddenham (2 miles north) and Sydenham (2 miles south). Larger places within reach include Oxford (13 miles west), Bicester (14 miles north-west), Abingdon-on-Thames (15 miles west), Henley-on-Thames (15 miles south), Benson (11 miles south-west) and Chinnor (3 miles south).
What’s near Towersey
Locally, our jobs take us to homes close to Church of St Catherine and Lord Williams's School, among other places. For rail, the closest station is Haddenham & Thame Parkway station, roughly 2 miles north of the centre. Nearby you will also find Dinton Castle (4.3 miles north-east) and Thame Community Hospital (1.4 miles west). Open spaces near Towersey include Snakemoor.
Landlord and trade work in Towersey
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Towersey as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Do you need non-slip bath coating in Towersey?
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people contact us after spotting one of these:
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Questions to ask before booking
- What preparation is included
- When it can be used again
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, generally overnight.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Get a quote
Most customers in Towersey get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
What non-slip bath coating costs
There is no area surcharge for Towersey. The price reflects:
- How many areas need work
- What kind of damage it is
- What the surface is made of
- How easy the damage is to reach
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Enamelled baths
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Also in Towersey
About our accreditations · Every repair comes with a one-year guarantee.
