Wiltshire · England

Non-Slip Bath Coating for Enford homes

Non-slip bath coating across Enford and nearby, done in a single visit in most cases.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Enford

About our non-slip bath coating in Enford

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for a bath or tray that is slippery when wet and safety for older or less mobile people, in shower trays, resurfaced baths and enamelled baths.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Enford (SN9)
County
Wiltshire
Guarantee
One year on every repair
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Enford and the surrounding area

Enford is about 7 miles north of Amesbury, in Wiltshire. Across the SN9 area, we carry out the work at your property. Enford is one of 425 places in Wiltshire we cover. You can also see our page for London, about 75 miles away.

All of SN9 is within our area. Close by, we cover Littlecott (1 mile east), Coombe (1 mile south-east), Fittleton (1 mile south-east), Haxton (1 mile south-east) and Netheravon (2 miles south). We also work in nearby towns such as Salisbury (13 miles south), Calne (15 miles north-west), Devizes (10 miles north-west), Amesbury (7 miles south), Marlborough (11 miles north) and Bugmore (14 miles south).

Near you in Enford

Locally, our jobs take us to homes close to Church of All Saints And St Margaret and Red Lion Freehouse pub, among other places.

Map of Enford © OpenStreetMap contributors

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we work on in Enford

  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths

Signs you need non-slip bath coating in Enford

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Signs it’s time to call us include:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Comparing quotes

  • What the guarantee covers, and for how long
  • What aftercare is recommended
  • How the colour is matched
  • What preparation is included

Our hiring checklist

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We clean up when we’re done and tell you when it’s ready to use.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit

Get a quote

Send us photos of the damage and one of the whole item, and tell us you are in Enford, and we’ll reply with a fixed price.

Get a free quote

Advice

Landlord and trade work in Enford

We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

How we price non-slip bath coating

There’s no charge for travel to Enford. The price comes down to:

  • How many items we do on one visit
  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • Where the damage is and how we get to it

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Two or three clear pictures are normally enough. Try to include:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Details of any past repairs
  • Daylight if possible, and no flash reflection

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why us?

  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted
  • Rooms protected and left tidy
  • One visit for most repairs

See our prices page.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Enford questions

What happens after I send pictures?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

How quickly can you book me in?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

What if the damage is worse than the photos show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

What information do you need?

Photos of the damage, a picture of the whole bath or shower tray and your postcode. After that, we just agree a date.

Are there extra charges for Enford?

Travel is included in the price, and we charge the same wherever you are.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.