Oxfordshire · England

Non-Slip Bath Coating in Enstone

Fixed-price non-slip bath coating in Enstone and the surrounding area, typically in one visit.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Enstone?

Covering Enstone

Enstone is about 9 miles north of Witney, in Oxfordshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Enstone is one of 443 places in Oxfordshire where we work. You can also see our page for Birmingham, about 43 miles away.

All of OX7 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Oxford Road, Venvell Close and Chapel Lane. If you’re just outside Enstone, we cover Church Enstone (1 mile north), Kiddington (2 miles east), Little Tew (3 miles north), Great Tew (3 miles north) and Swerford (4 miles north). Further out, we also cover Oxford (15 miles south-east), Banbury (11 miles north-east), Bicester (13 miles east), Witney (9 miles south), Carterton (12 miles south-west) and Kidlington (10 miles south-east).

Landmarks near Enstone

Typical jobs here are in homes near The Harrow Inn, Enstone Primary School and Church of St Kenelm, among other places. The closest station to Enstone is Charlbury station, about 3.3 miles south-west of the centre. Well-known places in the area include Old Forge Museum (Great Tew) (3.4 miles north). For a walk, there’s Blenheim Farm.

Map of Enstone © OpenStreetMap contributors

Non-slip bath coating in Enstone, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. If you are dealing with bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Enstone (OX7)
Region
Oxfordshire
Guarantee
A year, on every repair
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

How it works

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Have a window or extractor fan available
  • Clear the area around the damage
  • Keep children and pets away from the room on the day

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.

Get a free quote

Read more

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Landlords, agents and businesses in Enstone

For anyone letting property in or around Enstone, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

We work for landlords, letting agents and housing providers in Enstone as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

Do you need non-slip bath coating in Enstone?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

These are the problems we are asked about most:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled
  • Whether there are any call-out or travel charges

Our hiring checklist

How we price non-slip bath coating

We charge the same across the UK, including Enstone. What changes the price is:

  • How much damage there is
  • What kind of damage it is
  • Unusual colours or finishes
  • The material and finish

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • Natural light rather than flash

Email us photos of the damage and one of the entire item, with your OX7 postcode, and we’ll reply with a fixed quote.

Repairing versus replacing in Enstone

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Enstone

  • A year’s guarantee on all work
  • Everything repaired in place
  • Straight answers about what a repair can do
  • Free fixed quotes from pictures

Take a look at our full price list.

Honest limits

We will not take on work that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

Your questions about non-slip bath coating in Enstone

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What happens if you find more damage?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

Can I get a quote without a visit?

Generally, yes. Clear pictures let us give you a fixed price without visiting.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.