Wiltshire · England
Non-Slip Bath Coating for Faulston homes
Clear non-slip coatings for baths and shower trays for homes and businesses in Faulston and across Wiltshire. Send pictures for a free, fixed quote.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Non-slip bath coating in Faulston without replacing anything
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We’re frequently asked to fix safety for older or less mobile people and bath mats that harbour mould or get forgotten, across wet room floors (ask us), enamelled baths and resurfaced baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Faulston (SP5)
- Region
- Wiltshire
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need non-slip bath coating in Faulston?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What your quote should include
- Whether there are any call-out or travel charges
- What aftercare is recommended
- Who turns up on the day
- Whether the price is fixed and includes VAT
Nearby places to Faulston
More services for Faulston
Faulston: your questions answered
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work in Faulston?
Yes. We cover the entire UK and travel to Faulston and the rest of Wiltshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
For landlords and businesses
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What happens on the day
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow a morning or an afternoon, and we will keep you posted as we go.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
How to prepare
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
What non-slip bath coating costs
A fixed quote means you know the cost before booking. We look at:
- Unusual colours or finishes
- How much damage there is
- What the surface is made of
- Doing more than one item at once
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Quotes from your pictures
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Something in shot to show the size
- The material, if you know it
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- Normally one visit, start to finish
- A year’s guarantee on all work
See our pricing.
Our work in Faulston
Faulston is about 5 miles south-west of Salisbury, in Wiltshire. Wherever you are in the SP5 postcode area, a technician comes to you. Faulston is one of 425 towns and villages in Wiltshire we cover.
We cover every part of the SP5 postcode area and the streets around it. From Harvest Lane, The Styles and The Croft or anywhere nearby, a technician can come to you. If you’re just outside Faulston, we cover Croucheston (1 mile south-west), Broad Chalke (2 miles west), Compton Chamberlayne (4 miles north-west), Bowerchalke (4 miles south-west) and Barford St Martin (4 miles north). Further out, we also cover Salisbury (5 miles north-east), Amesbury (11 miles north-east), Bugmore (5 miles north-east), Milford (6 miles north-east), Old Sarum (7 miles north-east) and Harnham (5 miles east).
Local landmarks in Faulston
Around Faulston, we work in homes near The Three Horseshoes pub and Church of St John the Baptist. The nearest railway station is Salisbury station, about 4.9 miles north-east. Further afield, we also cover the area around Wilton Royal Carpet Factory Museum (3.7 miles north-east) and Harvard Hospital (4.5 miles east). Green spaces nearby include Compton Down.
About our accreditations · Every repair comes with a one-year guarantee.
