Wrexham · Wales
Non-slip bath & shower coating in Ffrwd, Wrexham
Fixed-price non-slip bath coating in Ffrwd and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to care for it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Getting ready for the visit
- Let us know which floor the room is on
- Point us to the nearest place to park
- Have a window or extractor fan available
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Read more
About our non-slip bath coating in Ffrwd
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you’re dealing with safety for older or less mobile people and a bath or tray that is slippery when wet, we can typically put it right, on enamelled baths, acrylic baths and wet room floors (ask us) alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Ffrwd (LL12, LL11)
- County
- Wrexham
- Guarantee
- One year on every repair
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- The material and finish
- How many items we do on one visit
- Access to the area
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- Details of any past repairs
- Natural light rather than flash
- One sharp close-up of the damage
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Ffrwd, and we’ll come back with a fixed quote.
Also in Ffrwd
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we can’t put right
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Ffrwd
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Shower trays
Ffrwd and the surrounding area
Ffrwd is about 3 miles north-west of Rhosddu, in Wrexham. Our repair technicians come to customers in Ffrwd and nearby villages, so you do not need to take anything anywhere. We work in all 115 towns and villages across Wrexham, from the larger towns to small villages. We work right across the region, from Ffrwd to Liverpool (22 miles away).
Our visits in LL12 and LL11 work the same way as everywhere else we cover. Streets in the area include Furnace Road and Cae-Pen-Ty Road. We also travel to Sydallt (1 mile east), Cymau (1 mile north-west), Cefn-y-bedd (1 mile north-east), Moss (1 mile south) and Brymbo (1 mile south-west). Larger places within reach include Wrexham (3 miles south-east), Caia Park (4 miles south-east), Offa (4 miles south-east), Rhosllannerchrugog (5 miles south), Rhosddu (3 miles south-east) and Acton (3 miles south-east).
Around Ffrwd
Typical jobs here are in homes near Church of Saint Mary, Ysgol Bryn Alyn and Abermorddu C.P. School, among other places. Other local landmarks include The Ffrwd pub (under half a mile north-west) and Ysgol Bryn Alyn (1.2 miles south-east). For rail, the closest station is Cefn-Y-Bedd station, about 0.8 miles north-east. Further afield, we also cover the area around Tŷ Pawb (3.6 miles south-east) and Caergwrle Castle (1.3 miles north). The countryside around Ffrwd includes Windy Hill and Brymbo Pool.
What we’re called out for in Ffrwd
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed:
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Comparing quotes
- When it can be used again
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- What preparation is included
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Ffrwd questions
What does non-slip bath coating cost?
Because every job differs, we price from photos. You will get a fixed figure before you book.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do you work in Ffrwd?
Yes, we do. Technicians travel to Ffrwd from across the region, with no extra charge for travel.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Repairing versus replacing in Ffrwd
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- We will tell you if it’s not worth repairing
- Normally one visit, start to finish
- Every repair guaranteed for a year
- Repair technicians who travel to you, UK-wide
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
