Wrexham · Wales
Bath Re-enamelling in Ffrwd
Problem with your bath in Ffrwd? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
Bath re-enamelling in Ffrwd, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with a bath in a colour that no longer suits and a coating lifting around the plughole, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Location
- Ffrwd (LL12, LL11)
- Region
- Wrexham
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Ffrwd?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- Wear marks under the taps
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
Comparing quotes
- How long it needs to cure
- What happens if the damage is worse than the pictures show
- Whether the colour is mixed to match
- Whether the price covers travel
What affects the price in Ffrwd
Resurfacing from £350. There is no charge for travel to Ffrwd. The price depends on:
- Doing more than one item at once
- Any earlier repairs that need removing first
- What kind of damage it is
- The material and finish
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Two or three clear pictures are generally enough. Try to include:
- Natural light rather than flash
- One picture of the entire bath
- Your postcode, so we can check dates
- One sharp close-up of the damage
Most clients in Ffrwd get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Work for landlords and builders
If you manage property in Ffrwd, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
What you get with us
- Everything repaired in place
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Typically one visit, start to finish
Take a look at our prices page or bath cost comparison.
Ffrwd: your questions answered
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
More services for Ffrwd
Where we work around Ffrwd
Ffrwd is about 3 miles north-west of Rhosddu, in Wrexham. Clients in Ffrwd get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover 115 places across Wrexham, from the larger towns to small villages. You can also see our page for Liverpool, about 22 miles away.
Jobs in LL12 and LL11 work the same way as everywhere else we cover. We regularly work on streets such as Furnace Road and Cae-Pen-Ty Road and the roads around them. Close by, we cover Sydallt (1 mile east), Cymau (1 mile north-west), Cefn-y-bedd (1 mile north-east), Moss (1 mile south) and Brymbo (1 mile south-west). Within a short drive, we also cover Wrexham (3 miles south-east), Caia Park (4 miles south-east), Offa (4 miles south-east), Rhosllannerchrugog (5 miles south), Rhosddu (3 miles south-east) and Acton (3 miles south-east).
Near you in Ffrwd
Typical jobs here are in homes near Church of Saint Mary, Ysgol Bryn Alyn and Abermorddu C.P. School and the streets around them. Nearby too are The Ffrwd pub (under half a mile north-west) and Ysgol Bryn Alyn (1.2 miles south-east). For rail, the closest station is Cefn-Y-Bedd station, roughly 0.8 miles north-east of the centre. Other landmarks nearby include Tŷ Pawb (3.6 miles south-east) and Caergwrle Castle (1.3 miles north). Open spaces near Ffrwd include Windy Hill and Brymbo Pool.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly.
Materials we work on in Ffrwd
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
