South Gloucestershire · England
Non-slip bath & shower coating in Filton, South Gloucestershire
Clear non-slip coatings for baths and shower trays for homes and businesses in Filton and across South Gloucestershire. Send photos for a free, fixed quote.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Filton, done in place
It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s worn-out textured areas and resurfaced baths that are now too smooth, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Filton (BS34, BS7)
- Region
- South Gloucestershire
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Filton. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
Take a look at our full price list.
Towns and villages near Filton
Also in Filton
Do you need non-slip bath coating in Filton?
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for any of the following:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- How the colour is matched
- Whether the price covers travel
- What protection goes down before work starts
- Who turns up on the day
Filton questions
What does non-slip bath coating cost?
Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you come to Filton?
We do. Technicians travel to Filton from across the region, and the price is the same as everywhere else.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
How the visit works
Arrival times are agreed in advance. On site, it takes a few hours in most cases. The room is left tidy and ready to use once it has cured.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Filton
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
How we price non-slip bath coating
You’ll know the full cost before you book. We take into account:
- Access to the area
- How many areas need work
- The material and finish
- How hard the colour is to match
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Any details about the material
- One picture of the whole bath or shower tray
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Covering Filton
Filton is about 3 miles north-west of Fishponds, in South Gloucestershire. Whether you are in the middle of Filton or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 110 towns and villages across South Gloucestershire, from the larger towns to small villages. We work right across the region, from Filton to Birmingham (about 73 miles away).
We cover every part of the BS34 and BS7 postcode area. Local streets include Church Road, Station Road and Shellard Road. Filton sits on or near the A38 and A4174, which makes travel easy. Close by, we cover Little Stoke (1 mile north), North Fringe of Bristol (1 mile north), Stoke Gifford (1 mile east), Stoke Lodge (1 mile north) and Charlton (1 mile north-west). We also work in nearby towns such as Kingswood (5 miles south-east), Mangotsfield (4 miles east), Yate (7 miles east), Fishponds (3 miles south-east), Thornbury (8 miles north) and Morton (8 miles north). Filton is one of the larger places we cover in South Gloucestershire.
What’s near Filton
Typical jobs here are in homes near Stoke Park, The Fox Den pub and Shield Road Primary School and the streets around them. Nearby too are Church of St Peter (within half a mile north-west) and Bristol Technology and Engineering Academy (0.7 miles north-east). Filton has its own railway station: Filton Abbey Wood station. Nearby you will also find The Mall (1.6 miles north-west) and Barton Regis Rural District (2.5 miles south). Green spaces nearby include Tarn Lake and Purdown.
Landlord and trade work in Filton
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
If you manage property in Filton, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
