Kent · England
Non-Slip Bath Coating in Flete
We travel to Flete for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating in Flete without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, across shower trays, wet room floors (ask us) and resurfaced baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Flete (CT9)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price non-slip bath coating
We price every job individually, from your photos. What matters most is:
- How many items we do on one visit
- What kind of damage it is
- Unusual colours or finishes
- The material and finish
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
Photographing the damage takes a minute. Please include:
- A picture taken from further back
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed quote the same day in most cases.
Also in Flete
Your questions about non-slip bath coating in Flete
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you come to Flete?
Yes. We work across the UK and come to Flete. Send us pictures for a fixed quote, or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Kent.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
What we are called out for in Flete
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
What your quote should include
- How the room is protected while they work
- Whether they match the colour on site
- How long the guarantee is and what it covers
- Whether the price covers travel
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Work done at your home or business
- We leave the room as we found it
- Every repair guaranteed for a year
- Free fixed quotes from pictures
See our full price list.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Flete
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
The process
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Before we arrive
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Our work in Flete
Flete is about 1 mile south-west of Margate, in Kent. We travel to homes and businesses in Flete, so there’s no workshop to go to. We work in all 922 towns and villages in Kent, from the larger towns to small villages. Our nearest city page is London, about 64 miles away.
We work across CT9 and the streets around it. From Victoria Road, Flete Road and Norfolk Road or a nearby road, we can come to you. If you are just outside Flete, we cover Westwood (1 mile east), Haine (1 mile south-east), Manston (1 mile south), Garlinge (1 mile north-west) and Margate (1 mile north-east). Further out, we also cover Canterbury (14 miles south-west), Broadstairs (3 miles east), Whitstable (15 miles west), Deal (10 miles south), Herne Bay (10 miles west) and Walmer (11 miles south).
Local landmarks in Flete
Locally, our jobs take us to homes close to St Gregory's Catholic Primary School, St. Catherine's Church and Hartsdown Academy. The closest station to Flete is Margate station, roughly 1.5 miles north of the centre. Further afield, we also cover the area around Spitfire and Hurricane Memorial Museum (1.3 miles south-west) and Westwood Cross (1.1 miles east). For a walk, there’s Sandwich and Pegwell Bay.
- Other local spots include Margate West (1.7 miles north-west)
About our accreditations · Every repair comes with a one-year guarantee.
