Gateshead · England

Non-slip bath & shower coating in Follingsby, Gateshead

Non-slip bath coating for Follingsby, without a refit. Get a fixed quote from your pictures, then book a visit.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Follingsby

Non-slip bath coating in Follingsby without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you’re dealing with worn-out textured areas and resurfaced baths that are now too smooth, we can usually put it right, whatever the material.

Big or small, it’s backed by a one-year guarantee in Follingsby and across Gateshead. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Area
Follingsby (NE10)
County
Gateshead
Warranty
One year on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths

Do you need non-slip bath coating in Follingsby?

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people get in touch after spotting something like this:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before booking anyone

  • What aftercare is recommended
  • How the room is protected while they work
  • When it can be used again
  • Whether cleaning and preparation are in the price

How to compare quotes

The process

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and we leave the room as we found it.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

How to prepare

  • Make sure the room can be ventilated
  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing

Getting a price

If you are in Follingsby and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Advice

Why repair rather than replace?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

What you get with us

  • Repair technicians who travel to you, UK-wide
  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • We’ll tell you if it’s not worth repairing

Take a look at our prices page.

Covering Follingsby

Follingsby is about 2 miles south of Hebburn, in Gateshead. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Follingsby is one of 49 places in Gateshead we cover. You can also see our page for Newcastle upon Tyne, about 6 miles away.

Jobs in NE10 are booked in the same way as anywhere else. We regularly work on streets such as Follingsby Avenue, Follingsby Close and White Rose Way. If you’re just outside Follingsby, we cover Leam Lane Estate (1 mile west), Usworth (1 mile south-west), Pelaw (1 mile north-west), Bill Quay (1 mile north-west) and Heworth (2 miles north-west). Within a short drive, we also cover Gateshead (3 miles west), Blaydon (8 miles west), Dunston (5 miles west), Whickham (7 miles west), Ryton (10 miles west) and Winlaton (8 miles west).

What’s near Follingsby

We visit homes around Heworth Grange School, White Mere Community Primary School and Saint Andrew's Church. The nearest railway station is Heworth station, about 1.8 miles north-west. Other landmarks nearby include North East Bus Museum (1.1 miles north-west) and Galleries Shopping Centre (2.7 miles south). For a walk, there is WWT Washington.

Map of Follingsby © OpenStreetMap contributors

Prices and what affects them

We do not charge extra for travel to Follingsby. The price depends on:

  • Whether we combine several jobs
  • Access to the area
  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear

There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

A couple of clear pictures is all it takes. It helps if you send:

  • Something in shot to show the size
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode

Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Follingsby, and we will come back with a fixed quote.

Follingsby: your questions answered

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How much does non-slip bath coating cost in Follingsby?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.

Is the work guaranteed?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Are there extra charges for Follingsby?

There’s no separate call-out charge. Your fixed quote includes everything.

Landlord and trade work in Follingsby

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.