Sunderland · England

Non-slip bath & shower coating in Ford, Sunderland

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Ford. Send pictures for a free, fixed quote.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Ford

Where we work around Ford

Ford is about 1 mile west of Sunderland, in Sunderland. From the centre of Ford to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 75 towns and villages in Sunderland. You can also see our page for Newcastle upon Tyne, about 10 miles away.

Jobs in SR4 are booked in the same way as anywhere else. Jobs here include addresses on Fawn Road, Friar Road and Front Road. Nearby, we also work in South Hylton (1 mile west), Castletown (1 mile north-west), North Hylton (1 mile north-west), Hylton Red House (2 miles north) and Hylton Castle (2 miles north-west). Further out, we also cover Washington (4 miles west), Houghton-le-Spring (5 miles south-west), Hetton-le-Hole (6 miles south), New Silksworth (3 miles south), Biddick Hall (4 miles north) and Brockley Whins (4 miles north). Being one of Sunderland’s larger places, Ford is somewhere we visit frequently.

Near you in Ford

In Ford, that means homes near Barnes Park, Highfield Academy and Church of The Good Shepherd, among other places. Also close by are Sandhill View Academy (1.1 miles south), Grindon Hall Christian School (0.7 miles south-west) and The Willow Pond pub (0.7 miles east). For rail, the closest station is Sunderland station, about 1.6 miles east. A little further out are Sunderland Royal Hospital (0.6 miles east) and East and Middle Herrington (2.6 miles south). Green spaces nearby include Warden Law and WWT Washington.

Map of Ford © OpenStreetMap contributors

About our non-slip bath coating in Ford

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Typical jobs include worn-out textured areas and a bath or tray that is slippery when wet, on resurfaced baths, wet room floors (ask us) and acrylic baths.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Ford (SR4)
Region
Sunderland
Guarantee
One year on every repair
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Your questions about non-slip bath coating in Ford

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Can you repair something that’s been repaired before?

In most cases. The old repair comes out first, so mention it when you send photos.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What happens next?

You will get a fixed quote back, plus dates. You’re under no obligation.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Honest limits

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths

What affects the price in Ford

There’s no area surcharge for Ford. The price reflects:

  • The size and number of damaged areas
  • How hard the colour is to match
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

We charge the same wherever you are, so there is no premium for Ford. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • One picture of the entire bath or shower tray
  • One sharp close-up of the damage
  • Natural light rather than flash
  • Any details about the material

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Repair or replace in Ford?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.

What you get with us

  • We leave the room as we found it
  • Honest advice, even when it means no job
  • Free fixed quotes from pictures
  • Normally one visit, start to finish

See our pricing.

Do you need non-slip bath coating in Ford?

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Send us a picture if you notice any of these:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

What to look for in a quote

  • Who turns up on the day
  • How changes to the job are handled
  • How soon you can use it again
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

How the visit works

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a few hours, tidy-up included.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

How to prepare

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Let us know which floor the room is on

How to get a price

The quickest way to a price is to send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Get a fixed quote

Read more

For landlords and businesses

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.