Lincolnshire · England

Non-slip bath & shower coating in Frieston, Lincolnshire

We travel to Frieston for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Frieston

How we handle non-slip bath coating in Frieston

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, in acrylic baths, enamelled baths and resurfaced baths.

Every repair is covered by our one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Area
Frieston (NG32)
Region
Lincolnshire
Cover
One year on every repair
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Repair or replace in Frieston?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

What you get with us

  • Work done at your home or business
  • We leave the room as we found it
  • Honest advice, even when it means no job
  • One-year guarantee on every repair

Read our full price list.

Frieston and the surrounding area

Frieston is about 7 miles north of Grantham, in Lincolnshire. Across the NG32 area, we carry out the work at your property. Frieston is one of 732 towns and villages in Lincolnshire we cover. Our jobs stretch from Frieston to Birmingham (66 miles away).

Our visits in NG32 work the same way as everywhere else we cover. You’ll find streets such as Lincoln Road, Frieston Heath Lane and Hough Road, and we cover them all. Other places close to Frieston include Normanton-on-Cliffe (1 mile south-east), Fulbeck (2 miles north), Leadenham (3 miles north), Byard's Leap (3 miles east) and Welbourn (4 miles north). Larger places within reach include Lincoln (14 miles north), Grantham (7 miles south), Sleaford (8 miles east), North Hykeham (12 miles north), Birchwood (14 miles north) and Hykeham (11 miles north).

Local landmarks in Frieston

In Frieston, that means homes near The Waggon And Horses pub, Caythorpe Primary School and St Vincent's Church and the streets around them. The closest station to Frieston is Ancaster station, roughly 3.3 miles south-east. Further afield, we also cover the area around Hough on the Hill Castle Hill (1.3 miles south-west).

Map of Frieston © OpenStreetMap contributors

Should I try a DIY kit first?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Prices and what affects them

There is no charge for travel to Frieston. The price depends on:

  • The material
  • Access to the area
  • Whether we combine several jobs
  • Any earlier repairs that need removing first

The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.

Getting a price from photos

You can take the photos on your phone, there is no need for anything special. Just make sure we can see:

  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • Any details about the material
  • Natural light rather than flash

The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.

What we do, step by step

Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a few hours. The room is left tidy and ready to use once it has cured.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Clear the area around the damage
  • Let the surface dry out before the visit

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed price

Related advice

Honest limits

Some jobs aren’t right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before booking.

Materials we work on in Frieston

  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Do you need non-slip bath coating in Frieston?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people

Before you book anyone

  • Whether cleaning and preparation are in the price
  • Whether the colour is mixed to match
  • What protection goes down before work starts
  • Who will actually do the work

Choosing a repair company

Frieston: your questions answered

Do you cover Frieston?

We do. Repair technicians travel to Frieston from across the region, and the price is the same as everywhere else.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

How do I get a price for non-slip bath coating in Frieston?

We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

What do you need from me?

Photos of the damage, a picture of the entire bath or shower tray and your postcode. Then we’ll agree a date.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.