Essex · England

Non-slip bath & shower coating in Fuller Street, Essex

We travel to Fuller Street for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Fuller Street

About our non-slip bath coating in Fuller Street

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can usually put it right, on shower trays, acrylic baths and resurfaced baths alike.

The work is covered for a year after we finish. Just call us if there is a problem and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Fuller Street (CM3)
Region
Essex
Warranty
A year, on every repair
Price
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repair or replace in Fuller Street?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Technicians who travel to you, UK-wide
  • Normally one visit, start to finish
  • No need to remove anything
  • CHAS and Constructionline accredited

Take a look at our prices page.

How the visit works

Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat
  • Keep pets and children out of the room while we work

Ask for a price

For a price in Fuller Street, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Send photos for a quote

Advice

Fuller Street questions

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you work in Fuller Street?

We do. We send a technician to Fuller Street for every job, and the price is the same as everywhere else.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

When a repair is not the answer

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we work on in Fuller Street

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

For anyone letting property in or around Fuller Street, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

Common problems we fix in Fuller Street

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The most common problems we’re called about are:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Comparing quotes

  • How the colour is matched
  • Whether there are any call-out or travel charges
  • What prep work is covered
  • Whether a trained technician does the job

Choosing a repair company

What non-slip bath coating costs

We do not charge extra for travel to Fuller Street. The price depends on:

  • How easy the damage is to reach
  • How many items we do on one visit
  • The material and finish
  • How many areas need work

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Natural light rather than flash
  • Any earlier repairs or coatings
  • One picture of the entire bath or shower tray
  • Any details about the material

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.

About Fuller Street

Fuller Street is about 4 miles west of Witham, in Essex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 644 towns and villages across Essex. Our jobs stretch from Fuller Street to London (35 miles away).

Postcode districts we cover here: CM3. Other places close to Fuller Street include Gambles Green (1 mile south-east), Gubbion's Green (1 mile north-west), Fairstead (1 mile east), Flacks Green (1 mile south-east) and Great Leighs (1 mile north-west). Larger places within reach include Chelmsford (6 miles south), Braintree (5 miles north), Maldon (9 miles south-east), Billericay (14 miles south), Witham (4 miles east) and Wickford (14 miles south).

Local landmarks in Fuller Street

Typical jobs here are in homes near The Square and Compasses pub and Church of St Mary the Virgin and the streets around them. For rail, the closest station is White Notley station, roughly 3 miles north-east of the centre. Further afield, we also cover the area around Cressing Temple (3.5 miles north-east) and Broomfield Hospital (4.1 miles south-west). Not far away are Sandylay and Moat Woods.

Map of Fuller Street © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.