Essex · England

Non-slip bath & shower coating in Flacks Green, Essex

Non-slip bath coating for Flacks Green, without a refit. Get a fixed price from your pictures, then book a visit.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Flacks Green

How it works

We agree an arrival time beforehand. On site, it takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Let us know if it has been repaired before
  • Let us know which floor the room is on
  • Let us know about parking or access

How to get a price

Most customers in Flacks Green get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed quote

Read more

Non-slip bath coating in Flacks Green without replacing anything

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We’re often asked to fix bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, across acrylic baths, shower trays and wet room floors (ask us).

All our work comes with a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Flacks Green (CM3)
Area hub
Essex
Warranty
One year on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Covering Flacks Green

Flacks Green is about 3 miles west of Witham, in Essex. We visit homes and businesses in Flacks Green, so there’s no workshop to go to. We work in all 644 towns and villages across Essex. Our jobs stretch from Flacks Green to London (about 35 miles away).

Every address in CM3 is within our area. We also cover the places around Flacks Green: Gambles Green (1 mile north), Terling (1 mile north-east), Fuller Street (1 mile north-west), Fairstead (1 mile north) and Gubbion's Green (3 miles north-west). Within a short drive, we also cover Chelmsford (5 miles south-west), Braintree (6 miles north), Maldon (7 miles south-east), Billericay (13 miles south-west), Rayleigh (15 miles south) and Witham (3 miles east).

What’s near Flacks Green

Around Flacks Green, we work in homes near Terling Church of England Voluntary Aided Primary School, United Reformed Church and The Rayleigh Arms and the streets around them. For rail, the closest station is Hatfield Peverel station, roughly 2.1 miles south-east. Further afield, we also cover the area around Broomfield Hospital (4.4 miles south-west) and Cressing Temple (3.3 miles north-east). Green spaces nearby include Sandylay and Moat Woods.

Map of Flacks Green © OpenStreetMap contributors

Work for landlords and builders

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Landlords, letting agents and housing providers in Flacks Green use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

FAQs for Flacks Green

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can tenants book a repair?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Can you quote from pictures?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before and we will plan for it.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

What a repair can’t fix

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Shower trays
  • Enamelled baths

Do you need non-slip bath coating in Flacks Green?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Comparing quotes

  • Whether the colour is mixed to match
  • How soon you can use it again
  • Whether cleaning and preparation are in the price
  • The length of the guarantee and what it covers

How to compare quotes

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

What you get with us

  • Same prices wherever you are
  • A year’s guarantee on all work
  • Free fixed quotes from pictures
  • Nothing taken out or refitted

Take a look at our pricing.

What non-slip bath coating costs

You will not pay by the hour. The price depends on:

  • What the surface is made of
  • The colour and finish to match
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Quotes from your pictures

When you take your photos, a few simple things make all the difference:

  • What it’s made of, if you know
  • A wider photo showing the whole bath or shower tray
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.