Carmarthenshire · Wales
Non-slip bath & shower coating in Furnace, Carmarthenshire
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Furnace. Free, fixed quotes from your photos.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
About Furnace
Furnace is about 4 miles west of Llanelli Rural, in Carmarthenshire. Wherever you are in the SA16 postcode area, we carry out the work at your property. Furnace is one of 195 towns and villages in Carmarthenshire where we work.
Our visits in SA16 work the same way as everywhere else we cover. Whether you live on Gors Road, Burry Road and Station Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Pembrey and Burry Port Town (1 mile south), Burry Port (1 mile east), Achddu (1 mile north-east), Y Graig (1 mile north-east) and Pembrey (1 mile west). Further out, we also cover Llanelli (5 miles east), Carmarthen (12 miles north), Llanelli Rural (4 miles east), Bigyn (5 miles east), Wern (4 miles east) and Ammanford (14 miles north-east).
Landmarks near Furnace
Typical jobs here are in homes near St Illtyd's Church, The Ship Aground Inn and Ysgol Glan-Y-Mor School. For rail, the closest station is Pembrey & Burry Port station, roughly 0.5 miles east. A little further out are Prince Philip Hospital (5.3 miles east) and Waun Twmpath Motte (1.9 miles north-east). For a walk, there’s Mynydd Pen-bre and Cwm Ivy Woods.
How we handle non-slip bath coating in Furnace
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can help.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Furnace (SA16)
- County
- Carmarthenshire
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It typically takes a morning or an afternoon, and you can get on with other things while we are there.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, normally overnight.
Before we arrive
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
Getting a price
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
How we price non-slip bath coating
We price every job individually, from your photos. The main factors are:
- Doing more than one item at once
- How many areas need work
- The material and finish
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- Natural light rather than flash
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Your postcode, so we can check dates
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Shower trays
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
Common questions in Furnace
Which areas do you work in?
Everywhere in the UK, Furnace included. There is no extra charge for travel.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What does non-slip bath coating cost?
Because every job differs, we price from pictures. You will get a fixed figure before you book.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Repairing versus replacing in Furnace
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
What you get with us
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
Read our full price list.
Landlords, agents and businesses in Furnace
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Furnace as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When to call us in Furnace
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
These are the problems we’re asked about most:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Comparing quotes
- When it can be used again
- The length of the guarantee and what it covers
- If travel is included in the price
- What protection goes down before work starts
Towns and villages near Furnace
What else we do in Furnace
About our accreditations · Every repair comes with a one-year guarantee.
