Carmarthenshire · Wales
Bath re-enamelling & resurfacing in Furnace, Carmarthenshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Furnace. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- A metal bath with a through crack
Send us photos and we will tell you honestly.
Materials we work on in Furnace
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Bath re-enamelling in Furnace, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. If you’re dealing with an old resurfacing that’s failing and an original cast iron bath that needs restoring, we can typically put it right.
Whatever the size of the job, it’s backed by a one-year guarantee in Furnace and across Carmarthenshire.
- Location
- Furnace (SA16)
- County
- Carmarthenshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Towns and villages near Furnace
More services for Furnace
Landlord and trade work in Furnace
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Common problems we fix in Furnace
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Lots of chips and rust spots
- A coloured bath you want in white
Questions to ask before booking
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How many areas need work
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether we combine several jobs
Our prices are the same across the UK, so there is no premium for Furnace. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Something in shot to show the size
- Natural light rather than flash
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Email us photos of the damage and one of the entire item, with your SA16 postcode, and we will reply with a fixed price.
Furnace and nearby
Furnace is about 4 miles west of Llanelli Rural, in Carmarthenshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 195 places in Carmarthenshire.
All of SA16 is covered. Whether you live on Gors Road, Burry Road and Station Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Pembrey and Burry Port Town (1 mile south), Burry Port (1 mile east), Achddu (1 mile north-east), Y Graig (1 mile north-east) and Pembrey (1 mile west). We also work in nearby towns such as Llanelli (5 miles east), Carmarthen (12 miles north), Llanelli Rural (4 miles east), Bigyn (5 miles east), Wern (4 miles east) and Ammanford (14 miles north-east).
Near you in Furnace
In Furnace, that means homes near St Illtyd's Church, The Ship Aground Inn and Ysgol Glan-Y-Mor School, among other places. The closest station to Furnace is Pembrey & Burry Port station, roughly 0.5 miles east of the centre. Well-known places in the area include Prince Philip Hospital (5.3 miles east) and Waun Twmpath Motte (1.9 miles north-east). Open spaces near Furnace include Mynydd Pen-bre and Cwm Ivy Woods.
Furnace questions
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Do you cover the entire of Carmarthenshire?
We cover the entire UK, including Furnace and the rest of Carmarthenshire. Just include your postcode and we will offer you dates.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Do you come to Furnace?
Yes, we do. Repair technicians travel to Furnace from across the region, and the price is the same as everywhere else.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a full day. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
