Gwynedd · Wales
Non-Slip Bath Coating for Gallt-y-foel homes
Our repair technicians come to Gallt-y-foel for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
Covering Gallt-y-foel
Gallt-y-foel is about 6 miles south of Bangor, in Gwynedd. Anywhere in LL55, we come to you. Our repair technicians cover all 165 towns and villages in Gwynedd. Our nearest city page is Liverpool, about 53 miles away.
Our repair technicians cover all of LL55 and the streets around it. If you’re just outside Gallt-y-foel, we cover Clwt-y-bont (1 mile north-west), Deiniolen (1 mile north), Dinorwig (1 mile south-east), Llanberis (1 mile south) and Brynrefail (1 mile west). Further out, we also cover Bangor (6 miles north), Caernarfon (6 miles west), Bethesda (4 miles north-east), Hirael (6 miles north), Upper Bangor (6 miles north) and Glanadda (5 miles north).
Landmarks near Gallt-y-foel
We visit homes around Wellington Inn, Eglwys Crist (Christ Church) and Dinorwig British School. Further afield, we also cover the area around Quarry Hospital (1 mile south) and Castell Llanddeiniolen (2.1 miles north). Not far away are Llyn Padarn and Foel Gron.
About our non-slip bath coating in Gallt-y-foel
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We regularly repair wet room floors (ask us), acrylic baths and shower trays, and common reasons people get in touch are worn-out textured areas and a bath or tray that is slippery when wet.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Gallt-y-foel (LL55)
- Region
- Gwynedd
- Cover
- One year on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Gallt-y-foel
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What areas do you cover?
We work UK-wide, so Gallt-y-foel is covered. Our prices are the same everywhere.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
- Typically one visit, start to finish
See our full price list.
Towns and villages near Gallt-y-foel
What else we do in Gallt-y-foel
What a repair cannot fix
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
- Enamelled baths
Landlord and trade work in Gallt-y-foel
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
How we price non-slip bath coating
We don’t charge extra for travel to Gallt-y-foel. The price comes down to:
- How hard the colour is to match
- How many areas need work
- What kind of damage it is
- Previous DIY repairs that have to come out
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- One sharp close-up of the damage
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A picture taken from further back
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
What we do, step by step
We agree an arrival time beforehand. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price the same day in most cases.
Advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we are called out for in Gallt-y-foel
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Send us a picture if you notice any of these:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Comparing quotes
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
