Wiltshire · England
Non-Slip Bath Coating in Gasper
Non-slip bath coating in Gasper without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Gasper
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on enamelled baths, acrylic baths and wet room floors (ask us), and common reasons people contact us are safety for older or less mobile people and a bath or tray that is slippery when wet.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Gasper (BA12)
- County
- Wiltshire
- Guarantee
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Gasper
Gasper is about 9 miles south of Frome, in Wiltshire. Jobs in Gasper are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Gasper is one of 425 towns and villages in Wiltshire we cover.
Our visits in BA12 are booked in the same way as anywhere else. Nearby, we also work in Pear Ash (1 mile south), White Cross (1 mile south-east), Penselwood (1 mile south), Zeals (1 mile south-east) and Bourton (2 miles south-east). Within a short drive, we also cover Westbury (13 miles north-east), Warminster (10 miles north-east), Mere (3 miles east), Tisbury (11 miles east), Boreham (10 miles north-east) and North Bradley (15 miles north).
Around Gasper
Our customers here include homes close to Church of St Peter and the streets around them. The nearest railway station is Bruton station, roughly 4.8 miles west. Further afield, we also cover the area around Four Towers (1.7 miles west) and Mere Museum (3 miles east). The countryside around Gasper includes Aaron's Hill.
Also near Gasper
More services for Gasper
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Before we arrive
- Point us to the nearest place to park
- Open a window if you can
- Let us know which floor the room is on
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Your questions about non-slip bath coating in Gasper
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Are there extra charges for Gasper?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you cover Gasper?
Yes. We work across the UK and travel to Gasper and the rest of Wiltshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you cover the whole of Wiltshire?
All of Wiltshire, and the rest of the UK. Travel is included in the price.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
What does non-slip bath coating cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- One price list for the entire UK
- Work done at your home or business
- Rooms protected and left tidy
- Free fixed quotes from pictures
See our pricing.
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- Doing more than one item at once
- How much damage there is
- The material
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
How to get a fixed price
You can usually get a fixed price without us visiting. To help us price it:
- A wider photo showing the whole bath or shower tray
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job without visiting.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
- Enamelled baths
Do you need non-slip bath coating in Gasper?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Send us a photo if you notice any of these:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
What your quote should include
- When it can be used again
- Who will actually do the work
- Whether there are any call-out or travel charges
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
