Wiltshire · England
Bath re-enamelling & resurfacing in Gasper, Wiltshire
Bath re-enamelling for Gasper, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a full day, tidy-up included.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Getting a price
If you are in Gasper and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
How we handle bath re-enamelling in Gasper
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We are often asked to fix a bath that stays dull however much you clean it and wear marks under the taps, across basins & shower trays, pressed steel baths and Victorian roll-tops.
You get a one-year guarantee, the same in Gasper as everywhere else we work.
- Area
- Gasper (BA12)
- County
- Wiltshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Gasper
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Send us a picture if you notice any of these:
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
Comparing quotes
- What preparation is included
- How soon you can use it again
- How your room will be protected
- Whether the colour is mixed to match
Aftercare tips
It’s all simple stuff:
- Do not use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs straight away
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Also near Gasper
Also in Gasper
Gasper questions
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do you cover Gasper?
Yes, we do. We send a technician to Gasper for every job, with no extra charge for travel.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
What areas do you cover?
Everywhere in the UK, Gasper included. Travel is included in the price.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Repair or replace in Gasper?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- Usually one visit, start to finish
See our pricing and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Covering Gasper
Gasper is about 9 miles south of Frome, in Wiltshire. Jobs in Gasper are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Our repair technicians cover all 425 towns and villages across Wiltshire, from the larger towns to small villages.
Postcode districts we cover here: BA12. Close by, we cover Pear Ash (1 mile south), White Cross (1 mile south-east), Penselwood (1 mile south), Zeals (1 mile south-east) and Bourton (2 miles south-east). Within a short drive, we also cover Westbury (13 miles north-east), Warminster (10 miles north-east), Mere (3 miles east), Tisbury (11 miles east), Boreham (10 miles north-east) and North Bradley (15 miles north).
Local landmarks in Gasper
Locally, our jobs take us to homes close to Church of St Peter. The closest station to Gasper is Bruton station, about 4.8 miles west. Further afield, we also cover the area around Four Towers (1.7 miles west) and Mere Museum (3 miles east). The countryside around Gasper includes Aaron's Hill.
Work for landlords and builders
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
We work for landlords, letting agents and housing providers in Gasper as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
