Ceredigion · Wales

Non-Slip Bath Coating for Glanduar homes

Fixed-price non-slip bath coating in Glanduar and the surrounding area, normally in one visit.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Glanduar

About our non-slip bath coating in Glanduar

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. If you’re dealing with bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can normally put it right, on enamelled baths, acrylic baths and resurfaced baths alike.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Glanduar (SA40)
County
Ceredigion
Cover
One year on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Glanduar and the surrounding area

Glanduar is about 16 miles north-east of Carmarthen, in Ceredigion. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 125 places across Ceredigion, from the larger towns to small villages.

All of SA40 is within our area, from the main roads to the quietest streets. You’ll find streets such as Bro Einon, Heol-y-Gaer and Cysgod y Cwm, all of which we cover. With the A485 close by, Glanduar is simple for us to get to. Nearby, we also work in Llanybydder (1 mile north-west), Alltyblacca (1 mile north-west), Alltyblaca (1 mile north-west), Pencarreg (1 mile north) and Llanwnnen (2 miles north). Within a short drive, we also cover Aberaeron (13 miles north), Lampeter (4 miles north-east), New Quay (13 miles north-west) and Llandysul (7 miles west).

Near you in Glanduar

We visit homes around Albion Arms and Church of St Peter. Well-known places in the area include Castell Dol Wllf (0.8 miles north-west). Not far away are Pen y Gaer.

Map of Glanduar © OpenStreetMap contributors

When to call us in Glanduar

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people get in touch after spotting something like this:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • A fixed price, and whether VAT is included
  • How the room is protected while they work
  • When it can be used again
  • What aftercare is recommended

How to compare quotes

What non-slip bath coating costs

Prices are worked out job by job, from your photos. The main factors are:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your photos

Most quotes are done from photos alone. To help us price it:

  • One sharp close-up of the damage
  • A photo taken from further back
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size

Email us a picture of the damage and one of the entire item, with your SA40 postcode, and we’ll come back with a fixed quote.

Work for landlords and builders

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

What we do, step by step

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. It usually takes a few hours, and you’re welcome to carry on with your day while we work.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Open a window if you can
  • Move bottles, mats and clutter away from the area
  • Let us know which floor the room is on

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Advice

FAQs for Glanduar

What if the damage is worse than the photos show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Do you cover Glanduar?

We do. We send a technician to Glanduar for every job, and the price is the same as everywhere else.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

What happens next?

We come back with a fixed quote, plus dates. There is no obligation to book.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths

Repairing versus replacing in Glanduar

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Glanduar customers choose us

  • A fixed quote before you book
  • Repair technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited
  • No need to remove anything

Take a look at our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.