Newport · Wales
Non-slip bath & shower coating in Graig, Newport
Non-slip bath coating in and around Graig: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
What a repair can’t fix
We will always be straight with you, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Shower trays
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
Non-slip bath coating in Graig, done in place
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you are dealing with a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, we can help, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Graig (NP10)
- County
- Newport
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Graig
More services for Graig
Prices and what affects them
We price every job individually, from your pictures. What matters most is:
- How many items we do on one visit
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- One picture of the whole bath or shower tray
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- What it’s made of, if you know
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
How to get a price
Most customers in Graig get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Signs you need non-slip bath coating in Graig
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
People usually call us when they notice one of these:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before booking
- What prep work is covered
- How your room will be protected
- Whether there are any call-out or travel charges
- How soon you can use it again
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Graig: your questions answered
What happens after I send pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Newport.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Do you work in Graig?
Yes. We cover the whole UK and travel to Graig. Send us pictures for a fixed quote, or call 0345 017 0787.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Landlords, agents and businesses in Graig
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Graig
- Most jobs done in one visit
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
Read our pricing.
Where we work around Graig
Graig is about 3 miles west of Stow Hill, in Newport. We travel to customers in Graig, so you do not need to take anything anywhere. Our repair technicians cover all 69 towns and villages across Newport. Our jobs stretch from Graig to Birmingham (about 79 miles away).
Here we cover the NP10 postcode area. We regularly work on streets such as Ty-Du Lane, Laurel Road and Berkley Road and the roads around them. With the A468 close by, Graig is simple for us to get to. If you’re just outside Graig, we cover Pentrepoeth (1 mile east), Garth (1 mile north-east), Rhiwderin (1 mile north-west), Bassaleg (1 mile east) and High Cross (1 mile north-east). We also work in nearby towns such as Newport (3 miles east), Victoria (4 miles east), Stow Hill (3 miles east), Maindee (4 miles east), Gold Tops (3 miles east) and Summer Hill (4 miles east).
Local landmarks in Graig
Typical jobs here are in homes near Pentrepoeth C.P. School, The Friendly Fox pub and Church of Saint Basil and the streets around them. You’ll also find Bassaleg School (0.9 miles east) and Rhiwderin Congregational Chapel (within half a mile north-west). The closest station to Graig is Pye Corner station, roughly 1 mile east. Other landmarks nearby include Friars Walk (3.1 miles east) and Tredegar House Museum (1.9 miles south-east). Green spaces nearby include Somerton and Pen Ffynnon-oer.
About our accreditations · Every repair comes with a one-year guarantee.
