Newport · Wales
Non-slip bath & shower coating in Victoria, Newport
Clear non-slip coatings for baths and shower trays for homes and businesses in Victoria and across Newport. Send photos for a free, fixed quote.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
How we handle non-slip bath coating in Victoria
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair acrylic baths, enamelled baths and resurfaced baths, and common reasons people contact us are a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Victoria (NP19, NP20, NP10)
- Area hub
- Newport
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- One price list for the entire UK
- Dust sheets down, tidy finish
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
See our prices page.
Honest limits
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
- Acrylic baths
Towns and villages near Victoria
What else we do in Victoria
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Ensure the area is dry
- Keep pets and children out of the room while we work
- Open a window if you can
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Questions from Victoria
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Common problems we fix in Victoria
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Questions to ask before you book
- Whether a trained technician does the job
- What happens if they find more damage
- Whether they match the colour on site
- Aftercare advice
How we price non-slip bath coating
There is no charge for travel to Victoria. The price depends on:
- The material
- Whether we combine several jobs
- The colour and finish to match
- How much damage there is
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath or shower tray
- Your postcode, so we can check dates
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Where we work around Victoria
Victoria is about 1 mile east of Newport, in Newport. Whether you’re in the middle of Victoria or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 69 towns and villages in Newport. Our jobs stretch from Victoria to Birmingham (77 miles away).
Every address in NP19, NP20 and NP10 is within our area, from the main roads to the quietest streets. We regularly work on streets such as King Lane, Eton Road and Cross Lane and the roads around them. If you are just outside Victoria, we cover Maindee (1 mile east), Barnardtown (1 mile north), Newport (1 mile west), Summer Hill (1 mile north-east) and Riverside (1 mile north). We also work in nearby towns such as Rogerstone (3 miles west), Bassaleg (3 miles west), Graig (4 miles west), Garth (3 miles west), Duffryn (3 miles south-west) and Pentrepoeth (3 miles west). Victoria is one of the larger places we cover in Newport.
Local landmarks in Victoria
Locally, our jobs take us to homes close to St John's Church, Maindee Hotel and St Stephen's church. Also close by are Maindee C.P. School (less than half a mile south-west), Catch22 Include Wales (0.8 miles south-east), St Julian's School (0.9 miles north) and Belle Vue Park (1.1 miles south-west). The closest station to Victoria is Newport (South Wales) station, about 0.8 miles west of the centre. A little further out are Friars Walk (0.5 miles south-west) and Caerleon Roman Fortress and Baths (1.9 miles north-east). Not far away are Somerton and Brynglas.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
