Shropshire · England
Non-slip bath & shower coating in Grindleforge, Shropshire
Our repair technicians come to Grindleforge for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
When to call us in Grindleforge
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- How to care for the finish
About our non-slip bath coating in Grindleforge
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with worn-out textured areas and safety for older or less mobile people, we can usually put it right.
Whatever the size of the job, it’s backed by a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Grindleforge (TF11)
- Region
- Shropshire
- Cover
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Grindleforge
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Grindleforge customers choose us
- We will tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- A fixed quote before booking
Read our pricing.
Our work in Grindleforge
Grindleforge is about 6 miles south-east of Telford, in Shropshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Grindleforge is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Grindleforge to Birmingham (about 23 miles away).
We work across TF11. If you’re just outside Grindleforge, we cover Grindle (1 mile south), Ryton (1 mile south-east), Kemberton (1 mile north-west), Beckbury (1 mile south-east) and Shifnal (3 miles north). Within a short drive, we also cover Madeley (3 miles west), Bridgnorth (7 miles south), Broseley (5 miles west), Albrighton (4 miles east), Much Wenlock (8 miles west) and Highley (12 miles south).
Local landmarks in Grindleforge
Locally, our jobs take us to homes close to St Andrew's Church and the streets around them. Grindleforge’s nearest station is Shifnal station, about 2.6 miles north of the centre. Nearby you will also find Museum of The Post Office In The Community (3.5 miles west) and RAF Hospital Cosford (3.6 miles north-east).
What we do, step by step
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon. Before leaving, we tell you how long to leave it and how to care for it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
Email us a photo of the damage and one of the whole item, and tell us you are in Grindleforge, and we’ll come back with a fixed quote.
Advice
Common questions in Grindleforge
What happens next?
We review the pictures and send a fixed quote.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
What areas do you cover?
Everywhere in the UK, Grindleforge included. Travel is included in the price.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Prices and what affects them
You won’t pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- What the surface is made of
- Doing more than one item at once
- How many areas need work
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Details of any past repairs
- The postcode, so we can plan the visit
- The material, if you know it
- A wider photo showing the entire bath or shower tray
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Landlords, agents and businesses in Grindleforge
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
What else we do in Grindleforge
About our accreditations · Every repair comes with a one-year guarantee.
