Shropshire · England
Bath Re-enamelling for Grindleforge homes
We travel to Grindleforge for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- Several chips and rust patches
Bath re-enamelling in Grindleforge, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s enamel that’s lost its shine and feels rough and thin, worn enamel in places, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Grindleforge (TF11)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Grindleforge: your questions answered
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
It’s been repaired before. Can you still fix it?
Normally, yes. The old repair comes out first.
What happens once I’ve sent pictures?
We come back with a fixed quote. You are under no obligation.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Also in Grindleforge
What affects the price in Grindleforge
Prices start from £350. You will know the full cost before booking. We take into account:
- The colour and finish to match
- Previous DIY repairs that have to come out
- The material
- The type of damage
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
When you take your photos, a few simple things make all the difference:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Any details about the material
- The postcode, so we can plan the visit
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
How the visit works
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Common problems we fix in Grindleforge
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Keep an eye out for these signs:
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
Before you book anyone
- What happens if the damage is worse than the pictures show
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- What preparation is included
Repairing versus replacing in Grindleforge
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
Why Grindleforge customers choose us
- Normally one visit, start to finish
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
See our pricing or bath cost comparison.
Our work in Grindleforge
Grindleforge is about 6 miles south-east of Telford, in Shropshire. Across the TF11 area, we carry out the work at your property. Grindleforge is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 23 miles away.
All of TF11 is covered, from the main roads to the quietest streets. We also cover the places around Grindleforge: Grindle (1 mile south), Ryton (1 mile south-east), Kemberton (1 mile north-west), Beckbury (1 mile south-east) and Shifnal (3 miles north). Larger places within reach include Madeley (3 miles west), Bridgnorth (7 miles south), Broseley (5 miles west), Albrighton (4 miles east), Much Wenlock (8 miles west) and Highley (12 miles south).
Near you in Grindleforge
In Grindleforge, that means homes near St Andrew's Church and the streets around them. The closest station to Grindleforge is Shifnal station, about 2.6 miles north of the centre. Well-known places in the area include Museum of The Post Office In The Community (3.5 miles west) and RAF Hospital Cosford (3.6 miles north-east).
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Landlords, agents and businesses in Grindleforge
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
