North Yorkshire · England

Non-Slip Bath Coating in Grinton

Non-slip bath coating across Grinton and nearby, generally in one visit.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Grinton

How it works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Ensure the room can be ventilated
  • Tell us if there are stairs or a lift
  • Avoid using the area for a few hours before we arrive

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.

Send pictures for a quote

Related advice

About our non-slip bath coating in Grinton

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for safety for older or less mobile people and a bath or tray that is slippery when wet, in resurfaced baths, wet room floors (ask us) and acrylic baths.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Grinton (DL11)
Area hub
North Yorkshire
Cover
12 months on all our work
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Landlords, agents and businesses in Grinton

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

About Grinton

Grinton is about 9 miles west of Catterick Garrison, in North Yorkshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We work in all 626 towns and villages in North Yorkshire, from the larger towns to small villages. We work right across the region, from Grinton to Leeds (42 miles away).

Every address in DL11 is within our area. Other places close to Grinton include Fremington (1 mile north), Reeth (1 mile north-west), Healaugh (2 miles west), Marrick (2 miles east) and Washfold (3 miles north). Further out, we also cover Catterick Garrison (9 miles east), Richmond (8 miles east), Colburn (10 miles east), Bedale (15 miles south-east), Aiskew (15 miles south-east) and Catterick (12 miles east).

Around Grinton

Around Grinton, we work in homes near Church of St Andrew, Reeth Community Primary School and Bridge Inn. Well-known places in the area include Bolton Castle (4.1 miles south). Open spaces near Grinton include Calver Hill.

Map of Grinton © OpenStreetMap contributors

Prices and what affects them

Quotes are free and the price is fixed. What we take into account:

  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once
  • How hard the colour is to match

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.

Getting a price from photos

Two or three clear photos are typically enough. It helps if you send:

  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • A coin beside the damage so we can judge size
  • Details of any past repairs

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

When we’d advise against a repair

To be straight with you, there are a few things a repair won’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Grinton

  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • One visit for most repairs
  • Rooms protected and left tidy

Take a look at our pricing.

Common problems we fix in Grinton

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Clients usually contact us about:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • What preparation is included
  • When it can be used again
  • How to look after the finish
  • What the guarantee covers, and for how long

10 questions to ask before you book

Common questions in Grinton

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Do you work in Grinton?

Yes, we do. We send a technician to Grinton for every job, and the price is the same as everywhere else.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Do the materials smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

How much does non-slip bath coating cost in Grinton?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.

Do you cover the whole of North Yorkshire?

We work UK-wide, and that includes Grinton. Our prices are the same everywhere.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.