Oxfordshire · England

Non-Slip Bath Coating in Harpsden

Clear non-slip coatings for baths and shower trays for homes and businesses in Harpsden and across Oxfordshire. Free, fixed quotes from your pictures.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Harpsden

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • One price list for the whole UK
  • Everything repaired in place
  • A fixed quote before you book
  • We leave the room as we found it

Read our pricing.

How we handle non-slip bath coating in Harpsden

The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. We work on resurfaced baths, enamelled baths and acrylic baths, and people most frequently call us about worn-out textured areas and a bath or tray that is slippery when wet.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Harpsden (RG9)
Region
Oxfordshire
Warranty
A year, on every repair
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How it works

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Point us to the nearest place to park
  • Let us know about parking or access
  • Tell us about any previous repairs or coatings

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Send pictures for a quote

Read more

About Harpsden

Harpsden is about 4 miles north-east of Caversham, in Oxfordshire. Whether you are in the middle of Harpsden or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Harpsden is one of 443 places in Oxfordshire we cover. We work right across the region, from Harpsden to London (about 35 miles away).

Our visits in RG9 work the same way as everywhere else we cover. Neighbouring places we cover include Harpsden Bottom (1 mile west), Henley-on-Thames (1 mile north), Shiplake Cross (1 mile south), Binfield Heath (2 miles south-west) and Lower Assendon (3 miles north). We also work in nearby towns such as Benson (11 miles north-west), Chinnor (12 miles north), Tilehurst (7 miles south-west), Wallingford (11 miles north-west), Little Heath (8 miles south-west) and Oakley (12 miles north).

Local landmarks in Harpsden

We visit homes around The Jolly Waterman pub, Rupert House School and Trinity Church of England Primary School, among other places. Nearby too are Mill Meadows (0.8 miles north-east), Church of St Margaret (within half a mile north-east) and Gillotts School (0.8 miles west). For rail, the closest station is Henley-On-Thames station, roughly 0.9 miles north. Other landmarks nearby include Frazer Nash Archives (0.7 miles north-east) and Royal Berkshire Hospital (5.4 miles south-west). For a walk, there is Sonning Hill and Hurley Chalk Pit.

Map of Harpsden © OpenStreetMap contributors

Common problems we fix in Harpsden

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Keep an eye out for any of the following:

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

Comparing quotes

  • How the room is protected while they work
  • When it can be used again
  • Who turns up on the day
  • What happens if they find more damage

Choosing a repair company

What we can’t put right

We won’t take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)

Landlord and trade work in Harpsden

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Housing associations and facilities teams use us for planned and reactive repairs in Oxfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

What affects the price in Harpsden

Every quote is fixed and free. What we take into account:

  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • The material and finish

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

Photographing the damage takes a minute. Try to send:

  • Details of any past repairs
  • Where you are, by postcode
  • Any details about the material
  • Daylight if possible, and no flash reflection

Upload photos of the damage and a wider shot of the whole item, with your RG9 postcode, and we will reply with a fixed quote.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Harpsden questions

Is repairing better than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.