Nottinghamshire · England

Non-slip bath & shower coating in Hawksworth, Nottinghamshire

Non-slip bath coating across Hawksworth and nearby, done in a single visit in most cases and guaranteed for a year.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Hawksworth

Non-slip bath coating in Hawksworth without replacing anything

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, in resurfaced baths, acrylic baths and wet room floors (ask us).

We stand behind the work with a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Hawksworth (NG13)
County
Nottinghamshire
Guarantee
12 months on all our work
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Where we work around Hawksworth

Hawksworth is about 7 miles south-west of Newark-on-Trent, in Nottinghamshire. We visit customers in Hawksworth, so nothing has to leave your home. We cover all 329 towns and villages across Nottinghamshire, from the larger towns to small villages. We work right across the region, from Hawksworth to Birmingham (about 55 miles away).

Here we cover the NG13 postcode area. If you are just outside Hawksworth, we cover Flawborough (2 miles east), Orston (2 miles south-east), Aslockton (2 miles south), Whatton-in-the-Vale (2 miles south) and Kilvington (3 miles east). Within a short drive, we also cover Beeston (15 miles west), Carlton (9 miles west), Hucknall (14 miles west), Newark-on-Trent (7 miles north-east), West Bridgford (11 miles west) and Netherfield (8 miles west).

Local landmarks in Hawksworth

We visit homes around Church of St. Mary and All Saints, among other places. The nearest railway station is Aslockton station, roughly 2.3 miles south. Further afield, we also cover the area around Flintham Museum (1.9 miles north-west) and Radcliffe Asylum (5.7 miles south-west).

Map of Hawksworth © OpenStreetMap contributors

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why Hawksworth customers choose us

  • Dust sheets down, tidy finish
  • Most jobs done in one visit
  • We come to you, anywhere in the UK
  • No extra charge for your area

Read our prices page.

Common questions in Hawksworth

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

Can you repair several things at once?

Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Do you come to Hawksworth?

Yes. We cover the whole UK and travel to Hawksworth. Send photos and we’ll quote, or call 0345 017 0787.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

When we’d advise against a repair

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we repair

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Let us know which floor the room is on
  • Mention any earlier repairs or resurfacing
  • Clear the area around the damage

Getting a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed price

Related advice

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

When to call us in Hawksworth

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

What to look for in a quote

  • Whether they match the colour on site
  • How changes to the job are handled
  • How the room is protected while they work
  • A fixed price, and whether VAT is included

How to compare quotes

What non-slip bath coating costs

You’ll know the full cost before you book. We take into account:

  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • How many items we do on one visit

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

Before you send photos, a few simple things make all the difference:

  • Where you are, by postcode
  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.