North Yorkshire · England

Non-Slip Bath Coating in High Entercommon

Clear non-slip coatings for baths and shower trays at your home in High Entercommon, with a one-year guarantee on every repair.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near High Entercommon

How we handle non-slip bath coating in High Entercommon

It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We work on wet room floors (ask us), shower trays and acrylic baths, and common reasons people contact us are safety for older or less mobile people and worn-out textured areas.

You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Where
High Entercommon (DL6)
Region
North Yorkshire
Guarantee
12 months on all our work
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

How we price non-slip bath coating

You will know the full cost before you book. We take into account:

  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • The material and finish

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Send photos for a quote

Phone photos are fine. Just make sure we can see:

  • A wider photo showing the entire bath or shower tray
  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before you book.

What we work on

  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)

How it works

Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Open a window if you can
  • Avoid using the area for a few hours before we arrive

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Related advice

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Repairing versus replacing in High Entercommon

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. The price reflects the work involved, not where you live. You’ll see the full price before you book.

Why us?

  • No need to remove anything
  • CHAS, Constructionline and SafeContractor accredited
  • Fixed prices from your pictures
  • One visit for most repairs

See our pricing.

Landlords, agents and businesses in High Entercommon

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We carry out planned and one-off repairs for housing associations and facilities teams in North Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

High Entercommon questions

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Do you come to High Entercommon?

We do. We send a technician to High Entercommon for every job, and the price is the same as everywhere else.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.

Common problems we fix in High Entercommon

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

People normally call us when they notice one of these:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

What your quote should include

  • Who turns up on the day
  • Whether the colour is mixed to match
  • Aftercare advice
  • What prep work is covered

10 questions to ask before you book

High Entercommon and the surrounding area

High Entercommon is about 6 miles south-west of Yarm, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. High Entercommon is one of 626 towns and villages in North Yorkshire where we work. We work right across the region, from High Entercommon to Newcastle upon Tyne (about 38 miles away).

All of DL6 is covered, from the main roads to the quietest streets. If you’re just outside High Entercommon, we cover Low Entercommon (1 mile north-west), Great Smeaton (1 mile south-east), Birkby (2 miles south), Neasham (3 miles north) and Deighton (4 miles south-east). We also work in nearby towns such as Catterick Garrison (10 miles south-west), Northallerton (8 miles south), Richmond (10 miles west), Colburn (10 miles south-west), Stokesley (12 miles east) and Bedale (12 miles south).

Landmarks near High Entercommon

We visit homes around Great Smeaton Academy Primary School and St Eloy's Church and the streets around them. High Entercommon’s nearest station is Dinsdale station, about 4.8 miles north. Well-known places in the area include South Cowton Castle (3.4 miles south-west).

Map of High Entercommon © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.