Wigan · England
Non-Slip Bath Coating in High Moor
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in High Moor. Send pictures for a free, fixed quote.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
When to call us in High Moor
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people contact us when they notice one of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Comparing quotes
- Who turns up on the day
- When it can be used again
- How the room is protected while they work
- What happens if they find more damage
About our non-slip bath coating in High Moor
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include worn-out textured areas and bath mats that harbour mould or get forgotten, on acrylic baths, shower trays and resurfaced baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- High Moor (WN6)
- County
- Wigan
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to High Moor
What else we do in High Moor
What non-slip bath coating costs
There is no area surcharge for High Moor. The price reflects:
- Doing more than one item at once
- The type of damage
- The material and finish
- Where the damage is and how we get to it
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Any earlier repairs or coatings
Send us a photo of the damage and a wider shot of the entire item, and tell us you are in High Moor, and we’ll reply with a fixed price.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
Ask for a price
Most clients in High Moor get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in High Moor
- Repair technicians who travel to you, UK-wide
- Normally one visit, start to finish
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
Read our pricing.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Wigan and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
FAQs for High Moor
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be a smell?
There may be a mild smell during the work.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Our work in High Moor
High Moor is about 4 miles west of Standish, in Wigan. We work in every kind of home, old or new, large or small, plus businesses and rented homes. High Moor is one of 63 towns and villages in Wigan we cover. Our jobs stretch from High Moor to Liverpool (15 miles away).
Our visits in WN6 work the same way as everywhere else we cover. That includes homes on Broadhey Lane and Stoney Lane and the roads around them. Other places close to High Moor include Hill Dale (1 mile west), Wrightington (1 mile east), Bispham Green (2 miles north-west), Andertons Mill (2 miles north) and Mossy Lea (2 miles east). We also work in nearby towns such as Wigan (6 miles south-east), Leigh (12 miles south-east), Ashton-in-Makerfield (8 miles south-east), Hindley (9 miles south-east), Atherton (12 miles south-east) and Ince-in-Makerfield (7 miles south-east).
What’s near High Moor
Our customers here include homes close to Parbold Douglas Church of England Academy, Christ Church and The Rigbye Arms and the streets around them. For rail, the closest station is Parbold station, roughly 1.3 miles south-west. Nearby you’ll also find Wrightington Hospital (1.5 miles south-east). Not far away are Mere Sands Wood.
About our accreditations · Every repair comes with a one-year guarantee.
