Sefton · England
Non-Slip Bath Coating in High Park
We travel to High Park for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
How we handle non-slip bath coating in High Park
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Our technicians work on acrylic baths, enamelled baths and shower trays, and people most frequently call us about a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- High Park (PR9, PR8)
- County
- Sefton
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about non-slip bath coating in High Park
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What areas do you cover?
The whole UK, including all of Sefton. Just include your postcode and we’ll confirm dates.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Straight answers about what a repair can do
- Fixed prices from your pictures
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
Take a look at our pricing.
Do you need non-slip bath coating in High Park?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before booking
- Whether cleaning and preparation are in the price
- A fixed price, and whether VAT is included
- Who turns up on the day
- Whether there are any call-out or travel charges
High Park and the surrounding area
High Park is about 1 mile north-east of Southport, in Sefton. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 36 towns and villages across Sefton. You can also see our page for Liverpool, about 17 miles away.
Our visits in PR9 and PR8 work the same way as everywhere else we cover. From Roe Lane, Mill Lane and Moss Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Blowick (1 mile south-west), Churchtown (1 mile north-west), Meols Cop (1 mile south), Marshside (1 mile north) and Southport (1 mile south-west). Within a short drive, we also cover Bootle (13 miles south), Formby (8 miles south-west), Maghull (10 miles south), Litherland (12 miles south), Seaforth (13 miles south) and Ford (12 miles south).
Landmarks near High Park
We visit homes around Hesketh Park, Presfield High School and Specialist College and Meols Cop High School, among other places. Other local landmarks include Bishop David Sheppard Church of England Primary School (within half a mile east) and St Simon & St Jude with All Souls (less than half a mile north). For rail, the closest station is Meols Cop station, roughly 0.5 miles south-west. A little further out are Museum of Buffoonery (1.7 miles west) and Southport General Infirmary (1.1 miles south-west). The countryside around High Park includes Martin Mere and Marshside RSPB reserve.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
How we price non-slip bath coating
Quotes are free and the price is fixed. What we take into account:
- The material
- Whether we combine several jobs
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- One picture of the entire bath or shower tray
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Any earlier repairs or coatings
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours, tidy-up included.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Ask for a price
For a price in High Park, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
What else we do in High Park
About our accreditations · Every repair comes with a one-year guarantee.
