Worcestershire · England
Non-slip bath & shower coating in Hill Side, Worcestershire
Clear non-slip coatings for baths and shower trays for homes and businesses in Hill Side and across Worcestershire. Send pictures for a free, fixed quote.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
Honest limits
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
Non-slip bath coating in Hill Side without replacing anything
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our technicians work on wet room floors (ask us), acrylic baths and shower trays, and common reasons people contact us are resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Hill Side (WR6)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Hill Side: your questions answered
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Are there extra charges for Hill Side?
There is no separate call-out charge. The fixed quote covers the visit and the work.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you come to Hill Side?
Yes. We cover the entire UK and travel to Hill Side and the rest of Worcestershire. Send photos and we will quote, or call 0345 017 0787.
Do you need non-slip bath coating in Hill Side?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for these signs:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
Questions to ask before booking
- What aftercare is recommended
- The length of the guarantee and what it covers
- How long it needs to cure
- A fixed price, and whether VAT is included
Places near Hill Side
Also in Hill Side
Prices and what affects them
We price every job individually. The main factors are:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- One picture of the whole bath or shower tray
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job the same day in most cases.
Where we work around Hill Side
Hill Side is about 7 miles north-west of Worcester, in Worcestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Hill Side is one of 376 towns and villages in Worcestershire where we work. You can also see our page for Birmingham, about 25 miles away.
Jobs in WR6 work the same way as everywhere else we cover. Other places close to Hill Side include Martley (1 mile south), Ockeridge (2 miles north-east), Little Witley (2 miles north-east), Holt (3 miles east) and Great Witley (3 miles north). We also work in nearby towns such as Worcester (7 miles south-east), Kidderminster (11 miles north-east), Bromsgrove (14 miles north-east), Great Malvern (9 miles south), Droitwich Spa (9 miles east) and Stourport-on-Severn (7 miles north-east).
Around Hill Side
We visit homes around The Crown pub, The Chantry School and Martley CofE Primary School and the streets around them. Also close by are Church of St Peter (0.8 miles south) and The Chantry School (0.7 miles south). A little further out are Olivers Mound Castle (4.4 miles north-east). For a walk, there is Ankerdine Hill.
Landlord and trade work in Hill Side
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Hill Side clients choose us
- Usually one visit, start to finish
- We come to you, anywhere in the UK
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
