Lincolnshire · England

Non-Slip Bath Coating in Hilldyke

Non-slip bath coating in Hilldyke without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Hilldyke

Non-slip bath coating in Hilldyke without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you are dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can help.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Hilldyke (PE22)
Area hub
Lincolnshire
Guarantee
One year on every repair
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Where we work around Hilldyke

Hilldyke is about 3 miles north-east of Boston, in Lincolnshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Hilldyke is one of 732 towns and villages in Lincolnshire we cover.

Jobs in PE22 are booked in the same way as anywhere else. Whether you live on Boston Road, Hurn Road and Sibsey Road or a nearby road, a technician can come to you. If you are just outside Hilldyke, we cover Cowbridge (1 mile south-west), High Ferry (1 mile north), Fishtoft Drove (1 mile north-west), Sibsey (2 miles north) and Frithville (3 miles north-west). Further out, we also cover Boston (3 miles south-west), Holbeach (14 miles south), Horncastle (14 miles north), Woodhall Spa (13 miles north-west), Pinchbeck (15 miles south-west) and Witham (3 miles south-west).

Near you in Hilldyke

In Hilldyke, that means homes near Boston High School. The closest station to Hilldyke is Boston station, roughly 2.8 miles south-west of the centre. Other landmarks nearby include Pilgrim Hospital (1.6 miles south). Open spaces near Hilldyke include Freiston Shore RSPB reserve.

Map of Hilldyke © OpenStreetMap contributors

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Your questions about non-slip bath coating in Hilldyke

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Do you cover Hilldyke?

Yes, we do. Technicians travel to Hilldyke from across the region, with no extra charge for travel.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Will I see the coating?

Very little: it shows as a matt area where you stand.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

Signs you need non-slip bath coating in Hilldyke

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Send us a picture if you notice any of these:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

Comparing quotes

  • Whether there are any call-out or travel charges
  • A fixed quote, and whether VAT is included
  • How long it needs to cure
  • What aftercare is recommended

How to compare quotes

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.

Why Hilldyke clients choose us

  • Every repair guaranteed for a year
  • Technicians who travel to you, UK-wide
  • No extra charge for your area
  • No need to remove anything

Take a look at our prices page.

Prices and what affects them

There is no charge for travel to Hilldyke. The price comes down to:

  • Access to the area
  • Previous DIY repairs that have to come out
  • The material and finish
  • How many areas need work

Our prices are the same across the UK, so there is no premium for Hilldyke. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from photos

When you take your pictures, a few simple things make all the difference:

  • A coin beside the damage so we can judge size
  • A picture taken from further back
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
  • Shower trays

What happens on the day

You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It generally takes a few hours, and you can get on with other things while we are there.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Send pictures for a quote

Read more

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.