Rotherham · England
Non-Slip Bath Coating for Hooton Levitt homes
Clear non-slip coatings for baths and shower trays in Hooton Levitt, carried out at your home and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
How we price non-slip bath coating
Each job gets its own fixed quote. These are the things that affect it:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- Access to the area
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Two or three clear pictures are usually enough. Try to include:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath or shower tray
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
How we handle non-slip bath coating in Hooton Levitt
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can normally put it right, on enamelled baths, shower trays and acrylic baths alike.
A one-year guarantee comes as standard, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Hooton Levitt (S66)
- Area hub
- Rotherham
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Everything repaired in place
- We come to you, anywhere in the UK
- One price list for the entire UK
- Dust sheets down, tidy finish
See our full price list.
Questions from Hooton Levitt
Which areas do you work in?
We work UK-wide, and that includes Hooton Levitt. Prices do not change with location.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send photos?
You will get a fixed quote back, plus dates. You’re under no obligation.
Do you work in Hooton Levitt?
We do. We send a technician to Hooton Levitt for every job, with no extra charge for travel.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first, so mention it when you send pictures.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Places near Hooton Levitt
More services for Hooton Levitt
Honest limits
Some jobs are not right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
- Enamelled baths
Hooton Levitt and nearby
Hooton Levitt is about 1 mile south-west of Maltby, in Rotherham. Jobs in Hooton Levitt are booked in like any other job: a fixed price from your photos, then a visit to do the work. Hooton Levitt is one of 71 towns and villages in Rotherham where we work. We work right across the region, from Hooton Levitt to Leeds (30 miles away).
Jobs in S66 work the same way as everywhere else we cover. We regularly work on streets such as Joan Lane and Copper Beech Crescent and the roads around them. Nearby, we also work in Maltby (1 mile north-east), Carr (1 mile south-west), Hellaby (1 mile west), Braithwell (2 miles north) and Micklebring (2 miles north). Within a short drive, we also cover Rotherham (6 miles west), Rawmarsh (6 miles north-west), Dinnington (3 miles south), Clifton (5 miles west), Swinton (6 miles north-west) and Mexborough (6 miles north-west).
Landmarks near Hooton Levitt
Our customers here include homes close to St Bartholomew's Church, Sandbeck Park and Roche Abbey and Maltby Lilly Hall Academy and the streets around them. The nearest railway station is Conisbrough station, about 5 miles north. Other landmarks nearby include Rotherham General Hospital (5.3 miles west) and St Leger Farm Museum (2.1 miles south).
Landlord and trade work in Hooton Levitt
Landlords, letting agents and housing providers in Hooton Levitt use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
For anyone letting property in or around Hooton Levitt, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Open a window if you can
- Let us know about parking or access
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Common problems we fix in Hooton Levitt
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Look out for these signs:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- What happens if they find more damage
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
